100HLf Syringe Pump
ISCO HLf-Series pumps give you the same accurate, predictable flow and pressure control as our standard D-Series, while conforming to safety standards for use in UL Class I, Division 2, Groups A B C & D, T4 environments. The hazardous location rating is achieved through internal design modifications including the use of brushless DC motors.
Receive your quote directly from the manufacturer.
The 100HLX pump handles a broad range of fluid delivery and dispensing applications in locations where equipment must be rated for Class 1, Div 2 (gas groups ABCD). Flow rate is settable from 0.01microliter/minute up to 30 ml/minute, with a 10,000psi (690 bar) pressure limit. The programmable HL controller gives you instant access to menu screens - even when the pump is running – to enable on-the-fly changes in limits and other operating parameters. An optional extension cable for remote operation lets you locate the pump up to 50 feet from the controller. Wetted materials are compatible with most aqueous and organic liquids, corrosive solutions, heated fluids, liquefied gases, viscous fluids, or slurries and pastes. If needed, optional materials such as Hastelloy C-276 are available on request.
100HLX Syringe Pump Features:
- Intrinsically safe design is UL/Demko approved for Class 1, Div 2 and Zone 2 locations.
Operating Modes:
- Constant Flow with up to three pumps
- Constant Pressure with up to three pumps
- Flow or Pressure Programming with a single pump
- Continuous flow or pressure with dual pump.
External Interface:
- RS232 serial interface
- Analog voltage inputs
- Digital inputs and outputs Chemical Compatibility
- Wetted materials have been tested for compatibility with 18 fluids.
