Agilent Technologies Products & Reviews

Product Filter

Explore by Field
Browse by Techniques
Agilent Technologies

Ratings

Search

Multicell UV Dissolution System

Agilent Technologies

An automated dissolution testing system using UV-Vis analysis     The Agilent Multicell UV Dissolution System is one of the most innovative and flexible tablet dissolution systems on the market. The system provides a fully integrated, automated dissolution testing system using the award-winning Cary 50 UV-Vis spectrophotometer, ensuring a highly efficient and rugged solution to online dissolution/UV-Vis analysis.

5.0/5.0
|2 Reviews

Agilent Select FAME GC Columns

Agilent Technologies

The Select FAME column is tuned for optimal cis/trans separations of FAMEs, especially the C18 isomers. The bonded column has an isothermal maximum operation temperature of 275°C and a programmed temperature of 290°C - a dramatic improvement of 50°C compared to non-bonded columns. Select FAME has better detection limits because the column has a very low bleed level. Even though this is a very polar column, the column efficienc…

4.5/5.0
|2 Reviews


HP-5ms GC Columns

Agilent Technologies

Agilent J&W HP-5ms has very low bleed characteristics that are ideal for GC/MS. The column has excellent inertness for active compounds, including acidic and basic compounds, and improved signal-to-noise ratio for better sensitivity and mass spectral integrity.

5.0/5.0
|2 Reviews

HP-FFAP Columns

Agilent Technologies

Agilent J&W HP-FFAP is designed primarily for the analysis of organic acids, free fatty acids, or samples that require quantitation of acidic impurities. The FFAP stationary phase is modified with acid to provide a very inert column that can accommodate the demanding analysis of acids dissolved in water. 

5.0/5.0
|1 Review

CP-Wax 52 CB columns

Agilent Technologies

CP-Wax 52 CB GC columns have lower minimum temperature and a higher maximum temperature than non-bonded polyethylene glycol (PEG) columns due to extensive cross linking, delivering higher resolution of low-boiling-point analytes. With guaranteed reproducibility and excellent temperature stability, CP-Wax 52 CB is ideal for EPA and ASTM methods.

5.0/5.0
|1 Review

CP-Sil 88 Columns for Dioxins

Agilent Technologies

Agilent J&W CP-Sil 88 for Dioxins has a very high polarity and a specific selectivity for dioxin and dibenzofuran separations. The column is supplied with an integrated retention gap to avoid problems with solvent condensation, thus allowing repeated splitless injections without phase deterioration, extending column life. 

5.0/5.0
|1 Review

DB-624 GC Columns

Agilent Technologies

Agilent J&W DB-624 is recommended for EPA methods 502.2 and 8021, as well as for fast GC/MS volatiles analysis. It is specifically designed for the analysis of volatile priority pollutants and residual solvents.

4.9/5.0
|2 Reviews

7697A Headspace Sampler

Agilent Technologies

Introduce volatile compounds from virtually any sample matrix into your GC or GC/MS. Automatic Leak Check, Priority Sample Positions, and Barometric Pressure Compensation improve uptime and efficiency.

4.7/5.0
|5 Reviews

Capillary Flow Technology

Agilent Technologies

Dependable leak-free capillary connections allow reliable backflush, split flow, heart-cutting, and GC x GC on Agilent 8890 and 7890 GC systems. These devices are low thermal mass, oven mountable, and inert.

5.0/5.0
|1 Review