Products & Reviews

Rtx®-1 columns exhibit long lifetime and very low bleed at high operating temperatures. A proprietary synthesis process eliminates residual catalysts that could cause degradation and increase bleed. • General purpose columns for solvent impurities, PCB congeners (e.g. Aroclor mixes), simulated distillation, drugs of abuse, gases, natural gas odorants, sulfur compounds, essential oils, hydrocarbons, semivolatiles, pesticides,…

• Wide range of stationary phases offers orthogonal separations. • High thermal stability maximizes system ruggedness and sensitivity. • Unrivaled column inertness for accurate analysis of active compounds. • 0.15, 0.18, and 0.25 mm ID formats accommodate varying sample capacities, speeds, and detectors. • Secondary columns come in convenient 2 m lengths for economical method development. GCxGC is a powerful multidimensional G…

- Optimized column selectivities guarantee resolution of ethanol, internal standards, and frequently encountered interferences. - Robust and reproducible column chemistry ensures longer column lifetime and consistent results. - 2 minute analysis time increases lab productivity. - Stable to 260 °C Don’t forget: Blood alcohol analysis requires dual column confirmation when using GC/FID.

Rtx®-VMS Columns (fused silica) (proprietary Crossbond® phase) • Application-specific columns for volatile organic pollutants by GC-MS • Complete separation of U.S. EPA Method 8260B compounds in less than 10 minutes • Stable to 260 °C • No known equivalent phases

Developed specifically for using LC coupled with GC-FID to accurately determine hydrocarbons found in mineral oils, which can migrate from packaging into food. • 9-component mix contains non-interfering internal standards as well as both mineral oil saturated hydrocarbon (MOSH) and mineral oil aromatic hydrocarbon (MOAH) markers to correctly cut fractions. • Certified reference material (CRM) manufactured and QC-tested in Re…

Stop spending your time and money developing LC-MS/MS multi-residue pesticide methods and mixing reference standards when you could be running samples. Restek’s trusted food safety experts have already done the work for you—with guaranteed accuracy and at a lower cost. Restek’s new certified reference materials (CRMs) for LC-MS/MS multi-residue pesticide analysis eliminate the need to source, purchase, and store individual ma…

The Rtx®-Volatile Amine column was designed specifically for analyzing volatile amines in difficult matrices, such as water. The unique base deactivation creates an exceptionally inert surface for these sensitive compounds, resulting in highly symmetrical peaks which allow low detection limits. The stable bonded phase yields a column that is not only retentive and highly selective for these compounds, but is also very robust…

A Restek® LC guard cartridge in an EXP® direct connect holder is the ultimate in column protection. To help protect your investment and further extend the life of our already-rugged LC columns, Restek offers the patent-pending guard column hardware developed by Optimize Technologies.Raptor™ EXP® Guard Column Cartridges Features: Free-Turn® architecture lets you change cartridges by hand without breaking inlet/outlet fluid…

Restek has raised the bar with a new high-temperature MXT®-Biodiesel TG column line to complement their fused silica column line for biodiesel analysis. These new MXT® -Biodiesel TG columns are stable to 430°C and offer unique retention gap options that minimize dead volume and leaks. Choose either a 0.32mm column factory-coupled to a 0.53mm retention gap, or select a single unit 0.53mm column featuring Integra-Gap™, a built-…

The Rxi®-PAH GC columns were designed by Restek with a higher phenyl-content stationary phase that provides unique selectivity to separate important polycyclic aromatic hydrocarbons (PAH) for food safety that cannot be distinguished by mass spectrometry. Even difficult priority compounds, such as the European Food Safety Authority (EFSA) PAH4, are easily separated and accurately quantified, results that cannot be achieved on…

Improved resolution and faster analyses, compared to 1701 or phenyl phases, make these the pesticide columns of choice. Rtx®-CLPesticides columns are specially designed to overcome the coelutions and analyte breakdown typically encountered in chlorinated pesticide analyses for EPA Methods 8081, 608, and CLP. By achieving baseline resolution of the 20 target analytes, more accurate qualitative data can be obtained, providing r…

midpolarity phase; Crossbond® trifluoropropylmethyl polysiloxane

Deactivation - unbelievably low breakdown for accurate and precise low-level GC analyses. Reproducibility - unbeatable manufacturing controls and QC testing for superior reliability across compound classes. Productivity - unparalleled cleanliness for maximized GC uptime and lab throughput.

Low-polarity phase; Crossbond diphenyl dimethyl polysiloxane General-purpose columns for drugs, solvent impurities, pesticides, hydrocarbons, PCB congeners (e.g., Aroclor mixes), essential oils, semivolatiles. Equivalent to USP G27 and G36 phases. Temp. Limits: -60 to 325/340 °C Similar To: Agilent 122-5033, 19091J-233; Phenomenex 7HG-G002-22; Varian CP8771; Grace 13657, 5121840, 8635223 Le…

Pro EZGC Chromatogram Modeler Propels Method Development Forward

Restek offers a full range of porous polymers, including HayeSep and Porapak polymer packings for analyses of volatile compounds and light solvents.

Removes up to 135 ml of oxygen or 2 g of water. Long life—typically purifies more than 480 cu ft of inert gas. Reduces oxygen to 15 ppb. Maximum operating pressure: 250 psi (1,724 kPa). Flow: 3 L/min @ 32 psi (221 kPa).

Flowmeters that can measure flammable gases are becoming mandatory due to the increased use of hydrogen in chromatography. With its Ex rating, the Restek ProFLOW 6000 meter is designed specifically with explosive and flammable gases in mind.

Certified reference materials (CRMs) manufactured and QC-tested in ISO-accredited labs satisfy your ISO requirements.

Quantity discounts not available.

Certified reference materials (CRMs) manufactured and QC-tested in ISO-accredited labs satisfy your ISO requirements.

For Agilent GCs equipped with split/splitless inlets

For Agilent GCs equipped with split/splitless inlets

Midpolarity crossbond phase general-purpose columns for alcohols, oxygenates, PCB congeners (e.g., Aroclor mixes), pesticides, and fragrance compounds. Equivalent to USP G46 phase.

A low- to midpolarity phase application-specific columns for volatile organic pollutants. Recommended in U.S. EPA methods for volatile organic pollutants. Temperature range: -20 °C to 240 °C. Equivalent to USP G43 phase. The unique polarity of the Rtx-624 column makes it ideal for analyzing volatile organic pollutants. Although the Rtx-502.2 column is recommended in many methods, the Rtx-624 column offers better resolution…