Drug discovery > Lead Discovery Products & Reviews

Easily pierceable, 70 µm thick, polyethylene with acrylic adhesive, EZ-PierceTM sealing films allow direct sample recovery with single or multichannel pipettors and robotic probes. Dimensions are 82.6 by 142.9 mm for 96-well plates.Features:easily pierceable with pipet tips or robotic probesinert, chemical resistantfunctional temperature range -40°C to +90°C

Easily pierceable, 70 µm thick, polyethylene with acrylic adhesive, EZ-PierceTM sealing films allow direct sample recovery with single or multichannel pipettors and robotic probes. Dimensions are 82.6 by 142.9 mm for 96-well plates.Features:easily pierceable with pipet tips or robotic probesinert, chemical resistantfunctional temperature range -40°C to +90°C

X-PierceTM sealing films are 89 µm thick vinyl with a 18 µm thick adhesive layer, designed for temporary protection from contamination and evaporation for samples in 96-well plates. A precut "X" over each well creates four flaps that easily bend downward when pushed by a robotic probe or pipet tip, allowing sample access without coring or adhesive fouling. A thin adhesive layer and special hairline cuts separating the X-Pierce…

With a 70 µm polyethylene top layer and inert white polypropylene and acrylic adhesive sublayer, this easy-piercing sealing film allows direct sample recovery with single or multichannel pipettors and robotic probes. The adhesive-free zone above each well prevents adhesive fouling of the pipet tip or probe, ultimately minimizing the amount of adhesive that comes into contact with the sample. Dimensions are 79.4 by 142.9 mm for…

BrightMaxTM sealing films are 203 µm thick white vinyl films with 37 µm acrylic adhesive for use with white microplates. The sealing films may be applied to either the top or bottom of the plate. A split backing aids in applying the sealing film properly. The light-reflective properties of BrightMax plate-sealing films on clear-bottom plates maximize sensitivity of bioluminescence and chemiluminscence assays in bottom-reading…

AbsorbMaxTM sealing films are 203 µm thick black vinyl films with 37 µm acrylic adhesive for use with 96-well, 384-well, and 1536-well black microplates. The sealing films may be applied to either the top or bottom of the plate. A split backing aids in applying the sealing film properly. Edge cutouts assist in positioning and accomodate ribs on the plate bottom. The light-blocking and absorbing properties of AbsorbMax sealing…

Evenly applies film on raised rim plates.

Evenly applies film on flat top plates.

Texan reagent reservoirs are reusable - an environmentally sound alternative to disposable reagent reservoirs. Their extra-large capacity means fewer refills and time saved. The V-shaped basin is compatible with both eight and twelve-place multiple pipettors with minimal reagent waste. Lids are removable - attached with ball and socket hinges - and latch tightly for secure storage of left-over reagents. With lids c…

eXTReme™ Seal features an extra-strong, thick adhesive to minimize evaporation yet removes easily without leaving residue on the plate.

eXTReme™ Seal features an extra-strong, thick adhesive to minimize evaporation yet removes easily without leaving residue on the plate.

The RR120 is a moderate to high volume production system designed to continuously print lines, coat/impregnate, inspect and dry rolls of materials. Each process is designed as an optional, separate module allowing users the flexibility to adapt the system to a specific application, multiple applications and throughput requirements. Customization is also available.

The ZX1010 platform can be configured with a maximum of 4 AirJet HR, 4 BioJet HR, 4 FrontLine HR, or 4 PolyDrop dispensers. Dispensers are sold separately so each machine can be customized to meet the application needs.

The dropping process has remained a highly manual technique for years, leaving an automation void between harvesters and microscopes. CellWriter now completes the continuum, by automating the dropping process to deliver quality spread interphase and metaphase nuclei for analysis.The CellWriter 480 is a robotic workstation that produces slides for both Karyotyping and FISH. By integrating BioDot’s nanoliter dispenser (BioJet™)…

The dropping process has remained a highly manual technique for years, leaving an automation void between harvesters and microscopes. CellWriter now completes the continuum, by automating the dropping process to deliver quality spread interphase and metaphase nuclei for analysis. Features:Automated Cell DroppingAutomated Probe/DAPI DispensingIntegrated HybridizationImprove Metaphase Spread QualityPerform Up To 8 Assays On One…

Features:Automated Cell DroppingAutomated Probe/DAPI DispensingIntegrated HybridizationImprove Metaphase Spread QualityPerform Up To 8 Assays On One SlideReduce Reagent CostsRemove The Need For Rubber Cement24 Slide Processing Capability

Non contact quantitative piezo dispensing technology that provides picoliter to nanoliter drop volumes.

Non contact, quantitative, high resolution ink jet printing that provides nanoliter to microliter drop volumes.

Non contact, quantitative, high resolution ink jet printing that provides nanoliter to microliter drop volumes.

Non contact, quantitative air jet dispensing that provides 0.5 uL/cm - 34 uL/cm and can coat or dispense individual drops.

Non contact, pneumatic diaphram valve dispensing for high viscosity jetting.

BioDot’s AD3220 system is designed for high-speed aspirating and dispensing applications to glass slides, microtiter plates, membranes or any custom surface. This tabletop platform is ideal for R&D environments, but still provides enough dispense area for pilot scale production. Dispensing technology, number of channels and deck options enable customization to meet multiple application needs.

The CellWriter™ S robotic workstation produces slides for Karyotyping, FISH and FFPE. Utilizing BioDot’s nanoliter dispensing technology (BioJet) with temperature and humidity control, the CellWriter S simplifies and automates the dropping process to efficiently deliver quality spread interphase and metaphase nuclei for analysis. FISHArray™ enables multiplexed FISH assays and eliminates the need for rubber cement when prepari…

This proprietary, quantitative, non-contact technology couples the BioJet “Drop-on-Demand” valve with a high-resolution syringe pump. The BioJet meters precise amounts of reagent, incorporating the benefits of non-contact dispensing and the ability to program exact drop volumes.

The Rainmaker features BioDot’s proprietary non-contact piezoelectric low volume dispensing technology and allows users to select a wide range of volumes as a single drop or high-frequency burst. Liquid volumes, from picoliters to nanoliters, can be dispensed On-the-Fly or in Step-and-Repeat mode. Rainmaker’s On-the-Fly printing supports multiple tip dispensing to discrete locations for true high-speed arraying.