Materials analysis examines the properties, composition, and behavior of materials at a microscopic and macroscopic level. Using advanced techniques such as microscopy, spectroscopy, and chromatography, materials analysts investigate the structure, purity, and performance of various substances. From industrial materials and nanomaterials to battery testing and beyond, this field provides critical insights into the characteristics and applications of materials across industries such as manufacturing, electronics, and healthcare. Explore how materials analysis drives innovation, quality assurance, and product development for a wide range of applications.
The Digital Barkausen Noise Analyzer - Rollscan 300 - is a fast, easy and reliable way to improve product quality.Rollscan 300 saves on material and labor expensesRollscan 300 is a digital Barkhausen noise analyzer. It is designed for surface quality control and testing of near-surface defects such as grinding burns, involving changes in stress and microstructure in a wide variety of ferritic steel and other ferromagnetic mate…
General purpose sensors are suitable for contact or non-contact testing of flat, concave, convex and irregularly shaped surfaces. Available for all analyzer models.
A range of Magnetic Particle Materials including wet and dry method powders and speciality products.
The FloormapVS2i floor scanner is a computerised MFL system designed to detect, size and map underfloor corrosion on above ground storage tanks. The FloormapVS2i is the best selling magnetic flux leakage (MFL) floor scanner and comes with up-graded magnets to improve corrosion detectability and sizing on thicker materials, faster data capture with a custom designed micro controller and all new software. The VS2i contains signi…
MPF is a magnetic particle suspension fluid designed for wet method magnetic particle inspection requiring a fluid with a flash point over 200F, low viscosity (less than 5.0cs), no odor, no fluorescence, and no yellow color. MPF has a low sulfur and halogen content.
Application• Non-destructive inspection of carbon steel, copper, brass, cupro-nickel, ferritic and other alloys• For tube inside diameter 0.250 inch (6.35mm) and up• Common usage includes boiler tubes, heat exchanger tubes, and storage tank roofs, floors, walls• Used in power generation, oil and gas, pulp and paper, and petro-chemical plants• Supports T4 + Saturn techniques for finned tubes• Small and large bore applicat…
Zet@Master is the powerful stand alone equipment of CMS Zet@ range in eddy current testing method. Multi channel and multi frequency, it allows the connection of several EC systems with only one unit to work in all configurations, on line or off line. It is able to drive several lines simultaneously. Deduced for flaws detection on tubes (welded or not), wires, bars, strip and automotive parts, made of austenitic, ferrous and n…
HD - CR 35 NDT, A film replacement technology, Computed Radiography (CR), is actually a digital radiography technique that uses what we called an Image Plate (IP) made of phosphor material to replace film as the imaging media. Like film the IP comes in various format and sizes and it is also flexible like film. After being exposure to radiation during x-ray or gramma ray inspection, these IPs are being scanned by the CR scanne…
With the SENTINEL™Vision HR Digital Radiography System you get state-of-the art imaging quality in a portable, durable and affordable package. Specifically designed for inspections both in the field and in the lab, SENTINEL™Vision HR is a computed radiography system that uses flexible phosphor imaging plates instead of film to create high resolution images. Its rugged portability makes it ideal to use in field conditions, and…
SENTINEL™ Model 880 Delta, Elite and Omega source projectors are portable, lightweight and compact industrial radiographic exposure devices. The patented device body consists of a titanium ‘S’ tube and cast depleted uranium (DU) shield contained within a 300 series stainless steel tube with stainless steel discs welded at each end forming a cylinder shaped housing. The discs are recessed to provide protection for the rear moun…
The BALTOSPOT Series is comprised of three divisions of directional and panoramic x-ray generators with varying specifications corresponding to different NDT applications, field activities and budgets. The CERAM x-ray generators are pulsed wave units available in maximum capacities of 235 and 300kV. They are directional tubes which contain ceramic tubeheads with a copper external anode and a beryllium window.Features Port…
Imperium’s i600 Acoustocam™ generates real time C-scan video images of subsurface defects. The output provides similar information to much more complex legacy systems, but with strikingly clear images. Clients choose the i600 Acoustocam™ because of its ease of use,portability, and broad application set in the market. Current systems require extensive training and skill. In contrast, a user of the i600 Acoustocam can utilize th…
The Gen6™ C-Mode Scanning Acoustic Microscope is the newest generation in Acoustic Microscopy Imaging (AMI) innovation. While taking the best from the Gen5™ (e.g. advanced features, aesthetics, and ergonomics), the Gen6 improves upon the rest and takes acoustic imaging to the next level.The Gen6 delivers the broadest range of capabilities available. Whether your needs are for nondestructive failure analysis, process developmen…
The EMAT Adaptor GS1100 provides a means for current NDT users to benefit from the advantages of non-contact EMAT transducers for pulse-echo flaw detection and thickness guaging, without the large capital outlay of replacing existing piezoelectric based flaw inspection systems and thickness/corrosion monitors. It acts as a bridge between an EMAT probe and a detection system designed for piezoelectric transducers. Designed to w…
The light and compact ultrasonic wall thickness gauge SONOWALL 50 enables the precise measurement of the wall thickness of components made of metal, glass, ceramics and plastics. This efficient device allows the measurement of materials with both flat and curved surfaces. The wall thickness gauge enables the quick and simple detection of the first signs of wear and corrosion, for example, on ships, storage tanks, pipelines and…
The Helix-XT is an ultrasonic based system for inspecting ferrous and nonferrous tubes from the inside. It is based on the Internal Rotating Inspection System (IRIS), which can be applied on almost any material.With the Helix-XT, accurate thickness measurements can be taken at any location along the tube, so small changes in thickness are measurable and the exact location of pitting and corrosion can be determined.The system u…
Phased Array Ultrasonic Flaw DetectorFeatures include: Clear Image Linear Imaging Sector Imaging Accurate Flaw Position and Size Ultrasonic Imaging and A-scan DisplayFunctions include: Easy operation and user-friendly interface. Conventional and phased array modes are available in the same system, which is convenient for inspectors' testing and evaluation. Up to 32 channe…
TOFD Ultrasonic Flaw DetectorFeatures include; Touch Screen Operation Innovative Appearance Intuitive Interface Modular Design.
Fatigue-free 3D visual inspection of small parts and assembliesVDM-E/ZSquinting into a microscope eyepiece all day long for parts inspection can be very uncomfortable. That's why we developed the VDM system.Features: Stable metal stand with small footprint 150W illuminator Real-time color imaging on a 15" LCD monitorThe VDM-E/Z™ is available with two interchangeable optics options: Patented Extended Depth of Field…
Hollow Cathode Lamps for most Atomic Absorption SystemsSelect your lamps from our new interactive website at www.labhut.comSimply select the element you require from the periodic table, enter the model of spectrophotometer and the system will show the available lamps.Single or multi-element lamps, fully guaranteed, and backed with expert advice.
Hamamatsu’s brilliantly designed ORCA-Flash4.0 is truly a game changer in the world of scientific imaging. Built on a revolutionary new Gen II sCMOS detector, the ORCA-Flash4.0 is the first sCMOS camera that challenges the performance of all CCD, EM-CCD, and Gen I sCMOS cameras. With its combination of low noise and high quantum efficiency, the ORCA-Flash4.0 delivers unprecedented sensitivity as well as high dynamic range, bla…
Regardless of sample size, the Keysight 5600LS large-stage AFM is ready to deliver high-resolution results. The versatile 5600LS is the world’s only commercially available AFM that allows imaging of both large samples (in air) and small samples (in air, or in liquid under temperature control) with an AFM & STM scanner. The 5600LS utilizes a fully addressable 200mm x 200mm stage and a new, low-noise design. Samples up to 8”…
The Keysight 5500 inverted light microscope (ILM) system combines the power of a high-resolution atomic force microscope with the direct optical viewing capability of an inverted optical microscope. The system’s advanced design allows the AFM to sit on top of an inverted microscope and under the illumination pillar, resulting in better optical contrast for the images. The Keysight 5500 ILM offers unparalleled performance an…
The Specac Mini-Film Maker is designed to produce high-quality thin films of polymer and plastic materials for infrared transmission analysis. This product enables quick and easy hot pressing of samples at any temperature between ambient to 250°C, to give constant and reproducible thickness films over the range 50 to 500 microns with a formed diameter of 15mm. The Mini-Film Maker Kit includes the Mini-Film Maker Press with…
The AbsoluteIDQ p180 Kit enables standardized, quantitative and reproducible analysis of ca. 200 endogenous metabolites from several metabolite classes (acyl-carnitines, amino acids, biogenic amines, (lyso-) phosphatidylcholines, sphingomyelins, hexoses, steroids). The metabolite analysis is based on flow injection analysis (FIA-ESI-MS/MS) and LC-ESI-MS/MS. The possibility of measuring different biological matrices of differe…
