Products & Reviews

Agilent J&W CP-SimDist UltiMetal performs extended analysis to C120, and is guaranteed to a Tmax of 450 °C, due to the virtually unbreakable inert UltiMetal tubing. The internal diameter of UltiMetal tubing is the same as for fused silica 0.53 mm id (Megabore) columns, providing trouble-free automation of on-column injection. 

Agilent J&W CP-Wax 51 for Amines is designed for the analysis of C4-C10 amines, diamines and aromatic amines. The column conforms to EPA method 607.

Agilent J&W DB-Petro is a 100% dimethylpolysiloxane phase, precision-engineered for the analysis of PONA, PIANO and PNA from petroleum processes. These high resolution DB-Petro columns are bonded, cross-linked, and solvent rinsable, and have been extensively QC tested to the strictest industry standards. 

PoraBOND Q is the long-term solution for analyzing volatile solvents and hydrocarbons. It is the most stable column of its kind and withstands repeated later injections. Due to our manufacturing techniques, the porous polymer is very pure and has virtually no catalytic activity. 

Agilent J&W CP-Sil 5 CB is a high efficiency column containing a 100% dimethylpolysiloxane phase. Separation is almost entirely based on boiling points, making this column suitable for a wide range of applications with a broad temperature range. 

Agilent J&W HP-88 is designed for the separation of fatty acid methyl esters (FAMEs). It provides greater cis/trans resolution than the DB-23, and has nearly identical selectivity as the CP-Sil 88, but with higher temperature limits. 

Agilent J&W Ultra 1 is a 100% dimethylpolysiloxane, nonpolar column that resembles HP-1 but with tighter specifications for retention index and capacity factors. Agilent J&W Ultra 2 is a (5%-phenyl)-methylpolysiloxane, nonpolar column and resembles HP-5 but with tighter specifications for retention index and capacity factors. 

Agilent J&W DB-35 columns are ideal for conformational analysis. The DB-35 is a (35%-phenyl)-methylpolysiloxane, mid-polarity column with low bleed. 

Agilent J&W DB-Dioxin columns are specifically engineered for the analysis of polychlorinated dibenzodioxins (PCDD) and dibenzofurans (PCDF). The column resolves 2,3,7,8-TCDD and 2,3,7,8-TCDF from all other isomers in one run.

Total petroleum hydrocarbon analysis is a routine technique in many environmental laboratories, with many samples needing to be screened. A simple and reliable method is required that provides the shortest analysis time. 

Agilent J&W DB-VRX features unique selectivity, engineered for optimum resolution of volatiles. The low-polarity DB-VRX columns deliver excellent peak shapes and are fully compliant with U.S. EPA methods 502.2, 524.2, and 8260.

Agilent J&W CP-Select CB for MTBE provides guaranteed analysis of MTBE in reformulated gasolines, with reproducible results. It has unique selectivity for ease-of-use with MTBE. The column's broad dynamic range for MTBE quantification delivers the highest productivity for increasingly demanding volatiles applications. 

Comprehensive solutions for biodiesel, biogas, and fuel ethanol analysis that conform to ASTM and EN standards. Factory configuration and testing allows fast installation so you can start running your biofuel samples quickly.

Increase productivity in your GC and GC/MS lab with high throughput and automated sample preparation capabilities The high-end PAL3 autosampler offers three types of injection techniques: liquid injection, headspace, and solid phase microextraction (SPME).

Refinery gas analyzers are an integral part of any refinery lab and provide valuable information that allow refiners to monitor and optimize catalytic and other processes, establish market value of a gas when sold to the chemical industry, and enable the study of gaseous products from process under study or development.

Based on the Agilent 990 Micro GC, this portable four channel, multi-dimensional Refinery Gas Analyzer works in remote environments with complete operational simplicity. It is optimized for specific RGA analytes, with a total analysis cycle time of less than three minutes.

These factory-tested, ready-to-use GC analyzers measure impurities in ethylene and propylene samples using FPD, FID, PDHID, and MS detectors.

Agilent Reformulated Fuel Analyzers can be used for analysis of various oxygenates, benzene, and heavier aromatics. Multiple methods on a single instrument provide flexibility and cost-efficiency.

Agilent now treats each premium 11mm inlet septa to eliminate sticking in the GC inlet. With our premium non-stick septa, you'll never have to scrape bits of septum out of your inlet. Agilent's premium septa also have a recess on the injection side, to guide the syringe needle to the same point with every injection.

Economy Indicating Moisture Removal Traps   Agilent Indicating Moisture Traps are designed to remove water, oil, and organics from gases employed in, but not limited to, gas chromatography. Refillable moisture traps are constructed from Lexan brand polycarbonate tubing. Lightweight, chemically resistant and of superior strength when compared to traps manufactured from acrylic. Agilent Indicating Moisture Traps have become the…

Agilents Precision Gas Flow Meter is the ultimate gas flowmeter for chromatography applications. This handheld flowmeter incorporates industry leading performance and features in a highly accurate and reliable package. The inherent stability of the rugged, solid state components allows us to provide the longest calibration interval on the market, all traceable to NIST standards.

The Renewable Gas Purification System from Agilent not only traps large quantities of contaminants and lasts a long time, but it is also recyclable. 

Frustrated with leaky, hard to use press-fit connectors? Now anyone in your lab can easily connect guard columns or retention gaps to GC columns by using Agilent Ultimate Union kits. 

Extra large gas purifiers (750 cc) are ideal for bulk purification applications or where several instruments are plumbed from a single gas source. They provide a low cost alternative to UHP grade gases. We construct each trap from one piece of heavy walled aluminum tube to eliminate potential leaks due to faulty welds. The moisture and hydrocarbon models can be refilled. The big oxygen traps must be replaced, but we offer indi…

Designed for Capillary Flow devices