Spectroscopy enables researchers to identify chemical compounds, determine molecular structures, and understand fundamental properties of samples through the analysis of absorption, emission, or scattering of light or other forms of radiation. From infrared (IR spectroscopy) to ultraviolet (UV-visible spectroscopy) wavelengths, spectroscopy plays a vital role in various scientific fields. Explore how spectroscopy drives innovation and discovery across diverse research areas.
The i-Raman®EX is an extension of our award winning i-Raman portable Raman spectrometer featuring a 1064nm version of our patented CleanLaze® excitation laser Using a high sensitivity InGaAs array detector with deep TE cooling and high dynamic range, this portable Raman spectrometer delivers a high signal to noise ratio without inducing autofluorescence, making it possible to measure a wide range of biological samples.The i-R…
The Exemplar® Plus is a high performance smart spectrometer utilizing a low stray light unfolded Czerny-Turner spectrograph It features a highly sensitive TE Cooled back-thinned (BT) CCD detector which is linearly summed for high dynamic range. Its long focal length, coupled with a high quantum efficiency detector, provides superior data quality over the entire 190-1100nm spectral range.The Exemplar Plus features a high signa…
The Exemplar® LS is a smart CCD spectrometer optimized for low straylight by utilizing an unfolded Czerny-Turner spectrograph It features on board data processing, USB 3.0 communication, and temperature compensation. The Exemplar LS is also optimized for multi-channel operation, featuring ultra-low trigger delay and gate jitter. Additionally, the Exemplar LS features a 2048 element detector and built-in 16-bit digitizer with…
The Exemplar® is the next step in the evolution of miniature CCD spectrometers It is the first smart spectrometer featuring on board data processing, USB 3.0 communication, and temperature compensation. The Exemplar is also optimized for multi-channel operation featuring ultra-low trigger delay and gate jitter.Additionally, the Exemplar features a 2048 element detector and built-in 16-bit digitizer with greater than 2.0 MHz r…
The Glacier X is the smallest TE cooled spectrometer on the market, making it the perfect solution for applications that require high performance and portability It is equipped with a 2048 element linear CCD array, built-in 16-bit digitizer, and high-speed USB 2.0 interface.Compared to non-cooled CCD spectrometers, the Glacier X miniature spectrometer offers higher dynamic range, significantly reduced dark counts, and superio…
The Sol™ 1.7 TE Cooled InGaAs array spectrometer couples B&W Tek’s class-leading spectrometer technology with the highest performing and most reliable NIR detectors available The Sol 1.7 is a high performance linear InGaAs array spectrometer, featuring 256, 512 (standard), and 1024 pixels with TE Cooling down to -10oC, all while providing high throughput and large dynamic range. Each spectrometer features an SMA 905 fiber opt…
The Sol™ 2.2 NIR spectrometer is the only extended InGaAs array spectrometer with a range as wide as 900nm-2200nm that can be configured for resolutions as fine as 3.5nm The Sol 2.2 is a high performance linear InGaAs array spectrometer, featuring 512 (standard) or 1024 pixels with TE Cooling down to -15°C, all while providing high throughput and large dynamic range. Using the included software, you can choose between High Se…
The Sol™ 2.2A TE Cooled InGaAs array spectrometer features a superior extended InGaAs array detector with unmatched stability and noise compensation The Sol™ 2.2A NIR spectrometer is a high performance linear InGaAs array spectrometer with an available spectral range of 900-2200nm. Its 256 pixel detector provides high throughput and large dynamic range with TE Cooling down to -15°C via a built-in 3-stage cooler. The built-in…
The Sol™ 2.6 is a high performance linear InGaAs array spectrometer featuring 256 pixels and providing high throughput and large dynamic range with TE Cooling down to -15oC via a built-in 3-stage cooler The Sol™ 2.6 is a high performance linear InGaAs array spectrometer featuring 256 pixels and providing high throughput and large dynamic range with TE Cooling down to -15°C via a built-in 3-stage cooler.Each spectrometer featu…
The BAC151B Raman video microscope sampling system allows you to convert any of B&W Tek's Raman systems into a Raman microscope It is compatible with our laboratory Raman probes and is designed to provide you with the highest level of flexibility and sampling utility. The BAC151B’s optional dual laser wavelength configuration allows you to use one port with two different input laser wavelengths. If you already have both a 532…
The GemRam™ is a lightweight, portable Raman spectrometer dedicated to both the verification of known gemstones as well as the identification of unknown gemstones It comes equipped with B&W Tek’s GemID™ identification software, powered by GemExpert’s spectral library of nearly 300 different gemstones, as well as unlimited space for user defined spectra that can be added at any time.The GemRam utilizes a spectrum stabilized 78…
The Thermo Scientific™ DXR™xi Raman imaging microscope pushes Raman microscopy to the next level High performance chemical imaging is now accessible to all, accelerating research for new and experienced users alike. Optimize imaging parameters in real-time to visualize your data faster using the comprehensive Thermo Scientific™ OMNIC™xi imaging software. With its automatic feature recognition and powerful component identifica…
The new RayShield Coupler for the alpha300 and alpha500 microscope series allows the acquisition of Raman spectra at wavenumbers down to below 10 rel. cm-1. This high-transmission coupler system includes a specialized narrow-band filter set which is optimally aligned to detect lines extremely close to the Rayleigh line while maintaining ideal Rayleigh shielding. The RayShield Coupler is available for a variety of laser wavele…
HT4000A is a sample preparation workstation that allows automation of sample preparation procedures by taking care of a large number of operations such as liquid handling, purification or filtration (including Solid Phase Extraction (SPE), Micro Extraction by Packed Sorbent (MEPS), Whatman® Mini-UniPrep® syringeless vials, syringe-filters and liquid/liquid extraction (LLE)), tracking and further sample processing such as vorte…
Andor’s USB 2.0 ikon-M SO series features high-QE, sensors for direct detection of soft X-Ray EUV or VUV photons. A convenient 16-point, knife-edge sealed 6” rotatable CF152 flange provides a robust and highly-effective seal to any compatible vacuum chamber interface. Andor’s USB 2.0 iKon-M SO 934 series features high-QE, sensors for direct detection of soft X-Ray EUV or VUV photons. A convenient 16-point, knife-edge sealed 6…
Andor’s Newton SO series features high-QE sensors for direct detection of soft X-Ray, EUV or VUV photons. A convenient 16-point, knife-edge sealed 6” rotatable CF152 flange provides a robust and highly-effective seal to any compatible vacuum chamber interface. Andor’s Newton SO series features high-QE sensors for direct detection of soft X-ray, EUV or VUV photons. A convenient 16-point, knife-edge sealed 6” rotatable CF152 fl…
On-line analysis with our S2 KODIAK - Meet the future of process control. Achieve the next level of efficiency in mining and mineral beneficiation with S2 KODIAK! Real-time process control in the mine is vital in order to achieve optimal cost efficiency. At the same time, it is challenging to bring an analytical instrument into the process. The S2 KODIAK on-line XRF works autonomous and maintenance-free 24/7.It delivers immed…
Rigaku nano3DX is a true X-ray microscope (XRM) with the ability to measure relatively large samples at high resolution. This is accomplished by using a high powered rotating anode X-ray source and a high-resolution CCD imager. The rotating anode provides for fast data acquisition and the ability to switch anode materials easily to optimize the data acquisition. AVAILABILITY: Japan, Austraila/NZ and North AmericaThe new nano3…
Andor’s standalone USB 2.0 iKon-M SY 934 series features a high-QE, back-illuminated sensor for direct X-ray detection. A convenient Berylium foil window blocks visible wavelengths with minimal ‘Beam Hardening’ of X-ray energies giving a direct detection energy range from 20keV.This 1024 x 1024 sensor array with 13 x 13 μm pixels offers high dynamic range and high spatial resolution. Seamless software selection of a range of…
Making a dedicated and expensive GC-TOF-MS used infrequently for just a few samples a thing of the past. The GC-APCI II source enables GC coupling to any Bruker TOF or QTOF, trap or FTMS system originally designed for LC coupling.With its second generation GC-APCI source, Bruker offers the greatest flexibility and highest performance with a combined GC frontend and high-resolution MS system for confident ID of unknown compoun…
A new generation of SPME products.The Fast Fit Fiber Assemblies were developed by Chromline srl Prato Italy in cooperation with Supelco expanding the applicability of SPME for rapid sampling and analysis using multiple fiber assemblies. This product line is centered around the barcoded SPME Fast Fit Assemblies that can be automatically exchanged on a CTC CombiPAL type autosampler equipped with the Multi Fiber EXchanger (MFX) s…
The SPME-LC fiber probes are intended as single-use devices for the extraction of small molecules out of a fluid followed by solvent desorption and LC analysis.Traditional solid phase microextraction (SPME) fibers were developed with common GC type phases, which were primarily designed for extraction of volatile or semi-volatile compounds using thermal desorption as the means of introducing sample into the chromatographic colu…
Carboxen®/Polydimethylsiloxane (CAR/PDMS) SPME FibersSolid Phase Microextraction (SPME) is an innovative, solvent-free sample prep technology that is fast, economical, and versatile. SPME uses a fiber coated with a liquid (polymer), a solid (sorbent), or a combination of both. The fiber coating removes the compounds from your sample by absorption in the case of liquid coatings or adsorbtion in the case of solid coatings. The…
Divinylbenzene/Carboxen/Polydimethylsiloxane (DVB/CAR/PDMS) SPME FibersSolid Phase Microextraction (SPME) is an innovative, solvent-free sample prep technology that is fast, economical, and versatile. SPME uses a fiber coated with a liquid (polymer), a solid (sorbent), or a combination of both. The fiber coating removes the compounds from your sample by absorption in the case of liquid coatings or adsorbtion in the case of sol…
Get more from your analysis with the Thermo Scientific™ iD7 ATR Accessory for the Thermo Scientific™ Nicolet™ iS™5 FT-IR Spectrometer. A monolithic diamond ATR crystal and high-efficiency, all-reflective optics combine with a variety of interchangeable crystal plates to provide the robustness and flexibility to meet your material identification and verification needs.The iD7 ATR optics maximize energy throughput, so you get h…
