GC-MS Products & Reviews

Preconfigured and chemically tested, the GC/MS/MS PAH analyzer is suitable for analyzing PAH concentrations in a wide variety of environmental matrices. 

The Agilent 7200B Quadrupole Time-of-Flight GC/MS system delivers full-spectrum, high-resolution, accurate-mass data for screening, profiling, and identifying GC-amenable compounds, using electron ionization and PCI/NCI modes.

Analysts routinely use GC/MS methods for pesticides analysis, especially to quantitate of large numbers of targets in complex matrices. 

Built around the 7010 Series Triple Quadrupole GC/MS, the Dioxins Food and Feed Analyzer provides the sensitivity required for trace dioxin and dioxin-like PCB detection.

When an instrument breaks down, Agilent On Demand Repair Services offer the most flexible option to get your lab up and running again. All repairs are performed by knowledgeable professionals using genuine factory parts. Our Field Service Engineers have years of experience, so you know that the job will be done right the first time.

The Agilent CrossLab Bronze service plan covers all onsite hardware repair costs, including instrument parts and consumables, required to get your system back online without delay. Eliminate unplanned repair costs for your laboratory instruments with the Bronze service plan.

Agilent CrossLab Multi-vendor Instrument services provides comprehensive repair, maintenance and compliance support for all your instruments, regardless of manufacturer. Agilent-developed compliance protocols and checklists assure consistent, reliable service, every time.

With the Agilent CrossLab software maintenance agreement, you get the help you need, when you need it, to keep your laboratory software running at its highest level. 

Data integrity is a significant driver in the compliance industry with which we must all comply. As the regulatory environment becomes more stringent, regulated labs must be prepared to prove that their data have not been compromised.

Agilent CrossLab Functional Verification service delivers cost-effective proof of maintenance and calibration for a range of analytical instruments.

Configured with Flame Ionization (FID) and Mass Spectrum (MS) detectors, Agilent's GC/MS Blood Alcohol Analyzer interfaces with the Agilent 7697A Headspace Sampler to provide rapid cycles time with no carry over following a challenge with a 0.40% EtOH concentration sample.

Built on the 7890 GC with 5977A MS, the Controlled Substances Analyzers provides an RTL method for analyzing illegal drug targets. 

The GC/MS Arsine Phosphine Analyzer is a robust solution for routine monitoring of arsine and phosphine impurities in olefin production. Based on 7890 GC and 5977B Mass Spec platforms, the Arsine Phosphine Analyzer comes preconfigured with hardware, consumables, and software, and the analyzer allows fast implementation of precise, stable, and easy to use methods for single-digit ppb detection of arsine and phosphine.

Based on the 7890 GC and 5977A Series Single Quadrupole Mass Spectrometer, the GC/MS Semi-Volatiles Analyzer incorporates a Multi-Mode Inlet to maximize sensitivity.

The GC/MS SureTarget Water Pollutants Screener provides fast data review and reporting of water pollutants as well as screening for unknown compounds. 

Harness Agilent CrossLab global compliance expertise to enable your lab to focus on your science and increase core productivity.

CrossLab Relocation services provides a complete end-to-end process for moving everything in the lab by utilizing standard, vendor neutral protocols, minimizing the stress of moving and restoring the lab to full operation with minimal downtime.

Ensure your method is downloaded, run, and ready for your samples after each repair or maintenance visit.

Connect, collaborate, and share insights! The Agilent Community is the best place to seek your colleagues' help with your applications, Agilent equipment, and supplies.

Agilent QuickProbe- Direct, real-time MS analysis of powders, solids, and liquids

The Agilent HLD PD03 Dry Leak Detector uses a mass spectrometer tuned to detect helium, which is used as a tracer gas to locate and/or measure very small leaks in enclosed devices or systems. The compact, multi-use HLD PD03 is both a precise instrument and a robust workhorse, featuring an easy-to-use touch screen interface and menu structure that quickly connect users to powerful capabilities. Built-in application setups short…

The new Agilent 7000E triple quadrupole GC/MS provides unequivocal intelligence and robustness to deliver the answers you seek. The routine workhorse for labs across a wide range of industry applications like pesticides in food or SVOCs in environmental samples now has SWARM autotune and improved diagnostic tools. HydroInert, the new ion source optimized for use with hydrogen as a carrier gas, helps your lab avoid disruptions…

The Agilent DS40M 2 m3/hr rotary vane pump is a compact and quiet system. The pump delivers a pumping speed of 1.8 m3/hr at 50 Hz, or 1.3 CFM at 60 Hz, with a base pressure of < 7 x 10-3 mbar, while operating as low as 45 dBa. The 0.1 kW, single-phase motor is magnetically coupled to the pump shaft through an enclosed, leak-tight case, eliminating the consequences of pump oil leakage common to pumps with dynamic shaft seals…

The Turbo V source is considered the gold standard in mass spec ionization. The patented orthogonal design delivers outstanding ionization efficiency and robustness across many applications, covering flow ranges of 5 uL/min to 3 mL/min. This renowned ion source acts as the foundation on which SCIEX mass spec systems are built and serves as the inspiration for many of the ion sources that followed.  

The IonDrive™ Turbo V source increases the capacity of the legendary Turbo V source, maintaining the simple orthogonal design but with higher capacity heaters and a wider sweet spot for enhanced sensitivity.