CrystalBreeder
Technobis Crystallization SystemsEnhance your early stage solid state screening with the CrystalBreeder bench-top system
Fluorometers and spectrofluorometers (also called fluorescence spectrometers) are used to measure the intensity and wavelength of fluorescent light emitted from a sample after excitation by illumination. Spectrofluorometers utilize monochromators to select the desired wavelengths, whereas filter fluorometers employ a set of filters. Spectrofluorometers for measuring steady-state fluorescence and lifetime fluorescence (or time-resolved fluorescence) are available, as well as fluorescence microscopes and microplate readers. Find the best fluorescence spectroscopy products in our peer-reviewed product directory: compare products, check customer reviews and receive pricing direct from manufacturers.
Enhance your early stage solid state screening with the CrystalBreeder bench-top system
3 Channel Microarray Analyzer - Designed for Routine Diagnostics
Detection and Analysis of Multiplexed Microarrays - OEM customized solution
As a high-end microscopes and cameras manufacturer, Nikon provides you with reliable and fully compatible microscope-camera combinations.
With new advances in field of view, sensitivity, wavelength, and sample accommodation, the Ultima 2Pplus delivers an ideal combination of flexibility, resolution, imaging depth and speed, allowing simultaneous imaging, stimulation and electrophysiology protocols with greater efficiency and effectivity. The system is designed specifically for intravital imaging, with fully motorized control of the objective X-Y-Z position, as…
Bruker microfluidics accessory units are designed to allow sequential labeling to be incorporated into localization microscopy protocols with the Vutara VXL single-molecule localization microscope. Bruker offers two units—PlexFlo and PlexFlo96. The units are controlled by Vutara's SRX software and allow flexible configuration of fluidics sequences that are run in conjunction with imaging cycles to allow users to label an unli…
Bruker's MuVi Selective-Plane Illumination Microscope (SPIM) is the fastest multi-angle view system on the market. MuVi incorporates years of Luxendo light-sheet technology innovations to provide high-speed volumetric acquisition for analyzing dynamic processes in delicate live specimens, as well as offering compatibility with any clearing method. A variety of other advanced hardware and software integrations can be easily co…
Excite your probes at any wavelengths to validate their NIR-II emissions with Photon etc's ClaIR infrared microplate reader.
IRina™ is an in vivo NIR-II spectral probe ideal to quantitate bio-photonic emissions and visualize spectral shifting of activity-based sensors in real time.
Plate CHAMELEON V microplate reader is an ideal tool for researchers who need a microplate reader to give them reliable, authenticated results when and where they need them. Plate CHAMELEON represents a new concept in multilabel detection instruments. Compact design houses up to 6 integrated technologies providing a powerful and flexible platform for the broadest spectrum of microplate applications with excellent sensitivity i…
Complete range of high quality cuvettes for use in optical spectroscopy Kromatek now has a range of excellent low cost cuvettes manufactured from high purity silica and manufactured to ISO 9000. Optical transparency is guaranteed as is matching if buying sets of cuvettes.The Kromatek cuvettes are extremely competitively priced! And we have optical glass cuvettes for colorimetry and general teaching applications UV-Visib…
Fluorovette™ as a replacement to low volume quartz-silica cells. The incredibly low cost makes them disposable which is great for assays which require maximum sensitivity down to 2nM detection limit and zero carryover between measurements. Avoids trapping air bubbles due to unique composite design UV Transparent down to 220nm Sample volume: 50 uL Pathlength: 0.75 mm Dead Volume in channels: 1 uL for the inlet channe…
For spectral recording in UV/Vis spectroscopic modes. MOS-450/AF for absorbance and fluorescence modes. This includes a dual illumination monochromator and single-channel detection. MOS-450/AF-CD for absorbance, fluorescence, fluorescence anisotropy and circular dichroism modes. This includes the same hardware as the /AF version, with in addition : polarizing optics, photoelastic modulator and synchronous signal detectio…
Biochrom offer a range of cuvettes from WPA, an established international brand, WPA has innovative products that meet the varied needs of cutting-edge life science laboratories, science education in schools and colleges, and tropical medicine clinics. The full range of cuvettes for the WPA range of Colorimeters and Spectrophotometers can be found by clicking the product information page.
Biochrom offer a range of cuvettes from Libra. Drawing on 35 years of experience in the design and manufacture of spectrophotometers, Biochrom brings you the Libra range of cuvettes, covering a wide range of applications, for use in almost any laboratory. The full range of cuvettes for the Libra range of Spectrophotometers can be found by clicking the product information page.
VoxCell Scan® is a dedicated live cell imaging software from VisiTech International that enables the users of VT-Hawk, VT-QLC, VT-Eye, and Infinity series of products to have automated control of their hardware. VoxCell Scan was designed to provide maximum image acquisition performance by tightly integrating the software with the confocal head and other hardware used for confocal imaging. Its easy-to-use interface enables th…
The VisiTech laser engine combines the tightly collimated beams from multiple lasers into a single collinear beam. This module houses up to six solid state lasers with their associated controller systems. An optional fibre input port for combining externally generated laser lines is available. The AOTF module may also be integrated with this unit to permit computer control of laser line selection, individual line intensity a…
From the magnesium fluoride coated optics to the individually configurable optical filters, the Thermo Scientific Lumina delivers performance and flexibility for research luminescence applications. Using pre-aligned, modular monochromators and the highest-quality optical components, the Lumina provides high resolution measurements with superior sensitivity. The quality does not end at the instrument, but extends to our softw…
The FLS980-stm is the world’s most sensitive modular, computer controlled spectrometer for acquiring steady state luminescence spectra, time resolved fluorescence spectra and the associated fluorescence decays in the ultraviolet - visible - near infra red spectral range with single photon counting sensitivity. Regarded as a complete laboratory in one instrument, the FLS980-stm offers ultimate sensitivity with high spectral res…
The LifeSpec II is a compact, fully integrated, high performance fluorescence lifetime spectrometer designed for use with high-repetition rate pulsed femtosecond, picosecond and supercontinuum lasers. The system is a fully automated solution combining hardware and software in a single package for fundamental research and routine laboratory applications. Its zero temporal dispersion optics set the standards for technical perfor…
Triple EmissionThe TripleSplit 3-way image splitter from Cairn Research is a simple device for dividing an image into either one, two or three separate, spatially equivalent components which can be displayed side by side on a single camera chip. Download data sheet Splitting is usually performed on the basis of wavelength or polarisation, allowing applications where there is a requirement for simultaneous, or high speed, acqui…
Our flexible LaserBank system will launch up to five laser lines into up to five different single-mode fibres. This system can be configured with new lasers or, in most cases, with existing solid state lasers. Please contact us for details of your requirements. The flexible architecture allows lasers to be mounted for TIRF, FRAP, photolysis, confocal or widefield imaging. It provides analogue intensity control and digital swit…
LumiScope for the detection of bioluminescence from aequorin and other luminescence probes.
The TIRF technique is a special kind of wide-field fluorescence technique for measuring cellsor SMC in an evanescent field without haze. By total reflection of the exciting light (typicallylaser) at the coverslip / medium interface, the fluorescence excitation is limited to a very thin space in the vicinity of the glass surface. The resulting fluorescence images exhibit extremely high contrast and resolution with the possibili…