Electrophysiology Accessories & Equipment Products & Reviews

25

Electrophysiology Accessories & Equipment

Product Filter

Explore by Field
Electrophysiology
Electrophysiology Accessories & Equipment
Refine your selection
Explore by Company

Ratings

Search

Selected Filters:

Digital Rat and Mouse Sterotaxic Instruments

Stoelting Co.

Our flexible Mouse and Rat Stereotaxic Instruments provides users with the ability to perform surgeries on both Mice and Rats on the same base. Digital Stereotaxics offers greater speed of operation and increased accuracy. The digital display helps reduce the risk of human error and increase accuracy (10-rather than 100-micron resolution). The large LED display is also useful for surgeries performed in low light, or constrain…

5.0/5.0
|1 Review


ibidi Pump System

ibidi GmbH

A pump system for the cultivation of, e.g. endothelial, cells under flow for simulation of blood vessels. Combine with ibidi Channel slides, such as the µ-Slide I Luer, for cell culture under flow conditions.

5.0/5.0
|1 Review

Hum Bug Noise Eliminator

AutoMate Scientific Inc.

Eliminate electrical interference from any analog signal, without filtering. Ideal for electrophysiology applications like EKG, EMG, and EEGs. Removes 50/60hz noise and harmonics caused by grounding problems, high gain amps, audio equipment, etc.

4.9/5.0
|3 Reviews

ValveLink®8.2 digital/manual controller

AutoMate Scientific Inc.

12VDC solenoid valve controller for real-time or pre-programmed liquid switching in perfusion, physiology, biophysics, electrochemistry, or general liquid-handling research applicationsIncrease reproducibility with 1 millisecond accuracyValveGuard™ technology detects bad valvesPrevent damage to your ValveLink and easily observe problem valves.Run experiments automatically - even unattendedMicroprocessor-based for accuracy and…

5.0/5.0
|1 Review

P-1000 Next Generation Micropipette Puller

Sutter Instrument Co.

Developed through years of experience with the Flaming/Brown style micropipette pullers and infused with leading edge technology, Sutter is proud to introduce the P-1000 micropipette puller. The most obvious new feature is the color touchscreen display that provides an intuitive and full-featured interface. Key Features: Color touch-screen interface Safe heat mode to protect and extend filament life Line repeat mode sim…

4.5/5.0
|5 Reviews
Request Pricing

P-2000 Laser Based Micropipette Puller

Sutter Instrument Co.

A significant advance in the technology of fabrication of micropipettes, optical fiber probes, and nanospray tips, is offered with the P-2000 micropipette puller. The P-2000 integrates a CO2 laser-based heat source with the technology derived from our extensive experience with conventional pullers. This system offers capabilities unmatched by other pullers. Key Features: Capable of pulling quartz, borosilicate and alumino…

3.7/5.0
|1 Review
Request Pricing

P-97 Flaming/Brown Micropipette Puller

Sutter Instrument Co.

The Model P-97 micropipette puller is the latest generation of the Flaming/Brown type puller for fabrication of micropipettes, patch pipettes and microinjection needles. While retaining many of the features on the Model P-87, the P-97 offers improvements in mechanical, electronic and software design. The result is better control of the pulling process and a higher degree of reproducibility. Features: Environmental chamber…

4.3/5.0
|3 Reviews
Request Pricing

PC-10 Puller

Narishige International

The PC-10 Puller pulls the glass capillary vertically, using the gravitational force of its own weight. For more versatility, this instrument has two modes: a single pull mode, which pulls at one stretch, and a double pull mode in which the setting is changed in mid-process. The PC-10 can therefore produce long, thin micropipettes for injection purposes, and firm microelectrodes for patch clamping. The change of setting in the…

4.2/5.0
|2 Reviews

In-Vivo Manipulators (IVM)

Scientifica Ltd

The In-Vivo motorised micromanipulator (IVM) was developed to meet the requirements of the most demanding in-vivo applications. High quality materials and precision assembly, along with the super smooth motion and long travel means that the IVM is stable, versatile and low-noise. It’s perfectly suited to electrophysiology and microinjection procedures and is available with single or three axes of motion. Features: • Ultra stab…

4.3/5.0
|1 Review

Universal Motorised Stage (UMS)

Scientifica Ltd

The Scientifica Universal Motorised Stage (UMS) provides rapid, accurate and intuitive remote control translation of your microscope around a sample. Designed to be used in combination with a fixed nose microscopy platform, the 400mm x 200mm UMS provides complete microscope support and the 50mm of travel in both the X and Y axes allows you to roam the largest of samples. An optional Z axis focus control is also available provi…

4.3/5.0
|1 Review

Brain Slice Keeper 4

AutoMate Scientific Inc.

* Slices maintained for many hours prior to transfer to recording chamber* Simple to set up and maintain * Many slices supported on FOUR quick-change nylon netsThe Brain Slice Keeper 4 has been designed to pre-incubate brain slices prior to transfer into recording chambers. It consists of FOUR pairs of closely fitting acrylic rings, upper and lower, between which is wedged a sheet of nylon netting. In operation, it is totally…

4.0/5.0
|1 Review

Series RC-20 Fast Exchange Open Bath Recording and Imaging Chambers

Harvard Apparatus, Inc.

Series RC-20 Fast Exchange Open Bath Recording and Imaging Chambers are available in 40µl (RC-24) and 50µl (RC-24E). The bath volume in these two models is the smallest of the open style chambers. This design allows very fast solution exchange for a variety of applications including patch clamp and studies in electrophysiology. The small bath volumes are especially useful when using drugs in small quantities. Both models are u…

3.3/5.0
|1 Review

CMA 110 Liquid Switch

CMA/Microdialysis

The CMA 110 Liquid Switch permits manual switching between up to three perfusion lines (syringes) and a microdialysis probe. This makes it possible to change different solutions instantaneously without any risk of introducing air bubbles into the microdialysis probe. • Instantly switch between syringes • Prevents introduction of air bubbles • No interruption of flow

3.0/5.0
|1 Review

Glass Capillary Tubing

Sutter Instrument Co.

Sutter Instrument Company, in addition to the finest micropipette pullers available, offers a wide selection of high quality capillary glasses in various sizes and materials. Though there are many types and sizes of capillary glass available, we have carefully selected only those that pass our criteria. Our expertise in micropipette technology assures you of precision and high quality. Types of glass available: Borosilica…

0.0/5.0
|0 Reviews
Request Pricing

P-30 Vertical Micropipette Puller

Sutter Instrument Co.

The model P-30 vertical micropipette puller is designed for the fabrication of basic micropipettes and patch-type pipettes. It will pull micropipettes with tip diameters as small as 0.3um and moderate taper lengths (10 to 15mm). By using an included patching attachment, the P-30 will pull the standard double pull patch-type pipette. Used with thin wall glass capillaries, it will generate pipettes or needles suitable for microi…

0.0/5.0
|0 Reviews
Request Pricing

Brain Slice Chamber Model BSC

KF Technology Srl

These slice recording chambers are designed to maintain isolated, living tissues in vitro in "interface" mode and allow stable electrophysiological recordings to be made from the preparation. The temperature is controlled by a proportional control heating unit.

0.0/5.0
|0 Reviews

StageHands Magnetic Tool Holder Kit 1

AutoMate Scientific Inc.

Magnetic base, arms, manifold and tube holders mount everything securely on your microscope stage for electrophysiology and perfusion. The magnetic base of these different StageHands are designed to stick tightly to a steel ring around your perfusion chamber like our QuickStageTM, or any steel surface nearby. They include a 1⁄4-20 screw to insert into a non-magnetic platform or air table. Footprint: 0.75"" (19 mm), adjustable…

0.0/5.0
|0 Reviews







Corning® 5 x 7 Inch Top PC-420D Stirring Hot Plate Kit with Digital Displays, 120V/60Hz

Corning Life Sciences

This Corning® kit Cat. No. 6795-420KIT includes: Cat. No. 6795-420D, one stirring hot plate Cat. No. 6795PR, external temperature controller Cat. No 440129, vertical support rod. Supplied as two 9 inch (22.9cm) support rods that can be screwed together (18 inches) Cat. No. 6970SR, stir bar retrieverAvailable for purchase separately and not included in the kit: Cat. No. 440140, boss head clamp Cat. No. 440141, holding rod…

0.0/5.0
|0 Reviews