Resources

Results per page

Selected Filters:

Spectroscopy Clear Filters

Scientific Posters

Development of EPA Method 539 Using UHPLC

11 Apr 2013

Application Notes

Determination of Coatings on Nylon Fibers by Near-Infrared Spectroscopy

10 Apr 2013

Application Notes

Elemental Analysis of Residual Oil by EDXRF

9 Apr 2013

Application Notes

Determination of Cd, Pb and Cu in Waste Water with the AAS novAA®

8 Apr 2013

Application Notes

The Analysis of Drinking Waters by U.S. EPA Method 200.8 Using the NexION 300X ICP-MS in Standard and Collision Modes

7 Apr 2013

Application Notes

30X Increased Sensitivity in the Analysis of Pesticides in Food by GC - Large Volume Splitless Technique

7 Apr 2013

Application Notes

Analysis of Oxygenates in Environmental Water Samples utilizing the EST Encon Purge and Trap Concentrator

6 Apr 2013

Application Notes

Increased Sample Throughput for ICP-OES on Drinking Water and Waste Water

4 Apr 2013

Application Notes

The Analysis of Environmental Waters using the Bruker 820-MS

2 Apr 2013

Application Notes

Analysis of Copolymer Levels in Polymer Pellets by Near-Infrared Spectroscopy

2 Apr 2013

Application Notes

High Purity Water for Environmental Analyses

1 Apr 2013

Application Notes

Non-destructive, Single Tablet Analysis Using the NIRS XDS RapidContent Analyzer

1 Apr 2013

Application Notes

Rapid Quantitative Analysis of Carbendazim in Orange Juice using UHPLC Coupled to the AxION 2 TOF Mass Spectrometer

1 Apr 2013

Application Notes

Analysis of P, S and Cl in Bio-diesel and Bio-ethanol using the Primini Biofuel

31 Mar 2013

Application Notes

Determination of Active Ingredients in Solid (Pharmaceutical) Dosage Forms Utilizing Solid-State Standard Additions

31 Mar 2013

Case Studies

Food Fraud: Pomegranate Juice Adulteration

31 Mar 2013

Application Notes

Non-Destructive Elemental Impurities Testing for USP 232

26 Mar 2013

Application Notes

Sample Preparation for XRF Analysis

11 Mar 2013

Application Notes

Micro-XRF Analysis for Metal Debris and Particle Analysis

7 Mar 2013

Application Notes

Determination of Limestone Addition in Cement Manufacture

7 Mar 2013

Application Notes

BioPharma Accurate Intact Protein Mass in 5 Seconds with ultrafleXtreme™

7 Mar 2013

Application Notes

XPS Analysis of Chemical Bonding States in an Ionic Liquid

6 Mar 2013

Application Notes

Imaging of a Diamond Film, Carbon Nanotubes and Graphene with Confocal Raman and Atomic Force Microscopy

5 Mar 2013

Application Notes

BioPharma N/C-Terminal Sequencing in 1 Minute with ultrafleXtreme™

5 Mar 2013

Application Notes

Analysis of Low Concentration Sulfur in Automotive Fuels by Mini-Z Sulfur Analyzer According to ASTM D2622-10

4 Mar 2013

Resources

Resources Filter

Search

Selected Filters:

Development of EPA Method 539 Using UHPLC

Determination of Coatings on Nylon Fibers by Near-Infrared Spectroscopy

Elemental Analysis of Residual Oil by EDXRF

Determination of Cd, Pb and Cu in Waste Water with the AAS novAA®

The Analysis of Drinking Waters by U.S. EPA Method 200.8 Using the NexION 300X ICP-MS in Standard and Collision Modes

30X Increased Sensitivity in the Analysis of Pesticides in Food by GC - Large Volume Splitless Technique

Analysis of Oxygenates in Environmental Water Samples utilizing the EST Encon Purge and Trap Concentrator

Increased Sample Throughput for ICP-OES on Drinking Water and Waste Water

The Analysis of Environmental Waters using the Bruker 820-MS

Analysis of Copolymer Levels in Polymer Pellets by Near-Infrared Spectroscopy

High Purity Water for Environmental Analyses

Non-destructive, Single Tablet Analysis Using the NIRS XDS RapidContent Analyzer

Rapid Quantitative Analysis of Carbendazim in Orange Juice using UHPLC Coupled to the AxION 2 TOF Mass Spectrometer

Analysis of P, S and Cl in Bio-diesel and Bio-ethanol using the Primini Biofuel

Determination of Active Ingredients in Solid (Pharmaceutical) Dosage Forms Utilizing Solid-State Standard Additions

Food Fraud: Pomegranate Juice Adulteration

Non-Destructive Elemental Impurities Testing for USP 232

Sample Preparation for XRF Analysis

Micro-XRF Analysis for Metal Debris and Particle Analysis

Determination of Limestone Addition in Cement Manufacture

BioPharma Accurate Intact Protein Mass in 5 Seconds with ultrafleXtreme™

XPS Analysis of Chemical Bonding States in an Ionic Liquid

Imaging of a Diamond Film, Carbon Nanotubes and Graphene with Confocal Raman and Atomic Force Microscopy

BioPharma N/C-Terminal Sequencing in 1 Minute with ultrafleXtreme™

Analysis of Low Concentration Sulfur in Automotive Fuels by Mini-Z Sulfur Analyzer According to ASTM D2622-10

Resources

Resources FilterResources Filter

Search

Selected Filters:

Development of EPA Method 539 Using UHPLC

Determination of Coatings on Nylon Fibers by Near-Infrared Spectroscopy

Elemental Analysis of Residual Oil by EDXRF

Determination of Cd, Pb and Cu in Waste Water with the AAS novAA®

The Analysis of Drinking Waters by U.S. EPA Method 200.8 Using the NexION 300X ICP-MS in Standard and Collision Modes

30X Increased Sensitivity in the Analysis of Pesticides in Food by GC - Large Volume Splitless Technique

Analysis of Oxygenates in Environmental Water Samples utilizing the EST Encon Purge and Trap Concentrator

Increased Sample Throughput for ICP-OES on Drinking Water and Waste Water

The Analysis of Environmental Waters using the Bruker 820-MS

Analysis of Copolymer Levels in Polymer Pellets by Near-Infrared Spectroscopy

High Purity Water for Environmental Analyses

Non-destructive, Single Tablet Analysis Using the NIRS XDS RapidContent Analyzer

Rapid Quantitative Analysis of Carbendazim in Orange Juice using UHPLC Coupled to the AxION 2 TOF Mass Spectrometer

Analysis of P, S and Cl in Bio-diesel and Bio-ethanol using the Primini Biofuel

Determination of Active Ingredients in Solid (Pharmaceutical) Dosage Forms Utilizing Solid-State Standard Additions

Food Fraud: Pomegranate Juice Adulteration

Non-Destructive Elemental Impurities Testing for USP 232

Sample Preparation for XRF Analysis

Micro-XRF Analysis for Metal Debris and Particle Analysis

Determination of Limestone Addition in Cement Manufacture

BioPharma Accurate Intact Protein Mass in 5 Seconds with ultrafleXtreme™

XPS Analysis of Chemical Bonding States in an Ionic Liquid

Imaging of a Diamond Film, Carbon Nanotubes and Graphene with Confocal Raman and Atomic Force Microscopy

BioPharma N/C-Terminal Sequencing in 1 Minute with ultrafleXtreme™

Analysis of Low Concentration Sulfur in Automotive Fuels by Mini-Z Sulfur Analyzer According to ASTM D2622-10

Resources Filter