Bold Line Cage Incubator H201 - Large volume incubator with local CO2/O2 climate chamber Microscope Incubators maintain your specimen alive during observation by creating the proper environmental conditions around the specimen, right on the microscope. The combined action of temperature controllers, gas mixers and humidifiers will ensure that your specimen feels ... at home.The Bold Line Cage Incubator maintains all the requi…
The Bold Line Top Stage Incubator H301 is the latest release from OKOLAB in terms of Top Stage incubation. It delivers superior temperature stability, humidity, CO2 and Oxygen control in a fully integrated fashion. The Bold Line Top Stage Incubator H301 Equipment: Incubating Chamber: fits in the microscope stage and holds the specimen. It is equipped with heated glass lid and Temperature and Humidity sensors. T Unit: Bo…
The Water Jacket Incubator provides superior incubation stability above and below room temperature. Water is pumped from a water bath into the base plate and into the lid, which are both Water Jackets. Temperature Control Mechanism Temperature is directly measured inside a reference Petri-dish and is controlled by circulating water from a water bath into the Water Jacket Chamber. The Temeprature Controller reads the temperatur…
UNO-PLUS All-in-one single specimen incubator with the size of a Multi Well plate. UNO-PLUS Features: All-in-one temperature/humidity/CO2 incubator Top Stage Incubator with the footprint of a Multi Well Plate Fits in any XY stage, with the additon of the Multi Well Plate holder (supplied by the stage manufacturer or by Okolab) Specimen holders for #1 35mm dish, #1 glass slide or #1 chambered coverglass Heated Glass Cov…
The Okolab Objective Heater is made by a flexible heating collar with a built in temperature sensor, which can be easily fastened around the objective with the supplied Velcro tape. The heating collar can be controlled by a Top Stage Bold Line Temperature controller, by UNO or by the Okolab Stand Alone Temperature Controller. Okolab Objective Heater Features: Temperature controlled rubber band Easy to place around the ob…
The T Glass Plate - Round Transparent and flat surface at controlled temperature for Inverted Microscopes The T Glass Plate fits into the microscope XY stages with circular opening and provides a transparent and flat surface at controlled temperature. The combined action of the conductive glass with built in temperature sensor and of the state-of-the-art PID controller with 3.2’’ touch screen and advanced calibration routine e…
T Glass Table provides a transparent and flat surface at controlled temperature. It can be placed in the optical path of any stereo microscope to provide a large, flat, clear, warm surface where several specimens can be maintained at physiological temperature. The combined action of the conductive glass with built in temperature sensor and of the state-of-the-art PID controller with 3.2’’ touch screen and advanced calibration…
Metal T Plate is a one-button solution for temperature control. Ideal to warm up the specimen during experiments lasting from minutes to hours where humidity and CO2 control are not required. It fits into the microscope stages with 110x160 mm opening. The combined action of the metal plate with built in temperature sensor and of the state-of-the-art PID controller with 3.2’’ touch screen and advanced calibration routine ensure…
Bold Line CO2 Unit, controls both air and CO2. The Bold Line Controllers can be operated as standalone units or in combination with each other through cabeless connection. Bold Line CO2 Unit Controller Features: Adds CO2 in Air or in N2 Range: 0-18% Accuracy: ± 5% of CO2 concentration, i.e. ± 0.25% at 5% CO2 Set Point Resolution: 0.1% Repeatability: better than 0.1% Total flow rate: 0.2-0.8 Nl/min Outlet press…
Bold Line O2 Unit Controller for Hypoxia. The Bold Line Controllers can be operated as standalone units or in combination with each other through cabeless connection. Bold Line O2 Unit [1-20] Features: O2 Concentration range: 1-20% Adds N2 to Air O2 Range: 1-20% Accuracy: ± 0.1% at 5% of O2 Repeatability: 0.05% of O2 Set Point Resolution: 0.1% Total flow rate: 0.2-0.8 Nl/min Outlet pressure: ambient N2 consu…
Bold LIne CO2 and O2 Unit [0-10;1-18] controller for Hypoxia conditions. The Bold Line controllers can be operated as standalone units or in combination with each other through cabeless connection. Bold Line CO2 and O2 Unit [0-10;1-18] Controller Features: CO2 range: 0-10% - O2 range: 1-18% Adds CO2 and N2 to Air CO2 range: 0-10% O2 range: 1-18% CO2 accuracy: ± 5% of CO2 concentration, i.e. ± 0.25% at 5% CO2 O2…
Bold Line CO2 - O2 Unit [0-20;1-95] Contoller for Hypoxia and Hyperoxia. The Bold Line Controllers can be operated as standalone units or in combination with each other through cabeless connection.Bold Line CO2 - O2 Unit [0-20;1-95] Controller Features: CO2 range: 0-20% - O2 range: 1-95% Mixes CO2, O2 and N2 CO2 range: 0-20% O2 range: 1-95% CO2 accuracy: ± 0.3 % at 5% CO2 and 5% O2 O2 accuracy: ± 0.2% at 5% CO2 an…
Bold Line CO2 - O2 Unit [0-10;0-1] Controller for very low oxygen concentrations. The Bold Line Controllers can be operated as standalone units or in combination with each other through cabeless connection. Bold Line CO2 - O2 Unit [0-10;0-1] Controller Features: CO2 range: 0-10% - O2 range: 0-1% Adds CO2 and Air to N2 CO2 range: 0-10% O2 range: 0-1% CO2 accuracy: ± 5% of CO2 concentration, i.e. ± 0.25% at 5% CO2…
Bold Line CO2 - O2 Unit CP Controller. This Gas Controller supplies desired Air-CO2 or N2-O2-CO2 mixture at controlled pressure. Bold Line CO2 - O2 Unit CP Controller Features: It replaces pre-mixed tanks One unit supplies up to 10 microscope incubators Ideal for imaging facilities Mixes two or three gas, according to operator's need Bold Line CO2 - O2 Unit CP Controller Technical Specifications: Operation mode…
