Identification and optimization of the chemical, series of chemicals or bio-molecule that will interact with the target using impartial, expert opinion about the best equipment, services and the latest techniques
The Endosafe®-PTS is a handheld spectrophotometer that utilizes FDA-licensed disposable cartridges for accurate, convenient endotoxin testing. With test results in just 15 minutes, you can rapidly move forward with your study or the next step in your process. The PTS is so easy-to-use, you can run the test in just three simple steps: Enter your sample ID into the system’s memory using the keypad Add your sample to the disposab…
The Equitech Dip Probe has been designed for in-situ measurement of aqueous solutions in the laboratory environment. To complement the Equispec Analyzers, Equitech has developed a complete line of probes and flow cells for both process and laboratory environments. Our design philosophy calls for fewer optical components than competitive models. This minimizes signal and data distortion and enables us to pass along the cost sav…
A new paradigm in weighing advances the fusion process: TheAnt serves to automatically weigh the sample and dispense the flux with extreme precision, to an accuracy of one tenth of a milligram. Specially designed for: Laboratories with high sample throughput for analysis by XRF, AA and ICP Perfect manipulation with Claisse borate fluxes Distinguishing features: Automatic weighing of sample Automatic dispensing of…
Prepares : Glass disks for XRF analysis Solutions for AA and ICP analysis Processes : Cement, ceramic, slag, glass, silica, carbonates Mining and geological samples Sulfides Bauxites, fluorides Polymers, catalysts Pure metals, ferroalloys and other alloys Samples containing highly volatile elements Distinguishing features : Precise control of low and high fusion temperatures NO calibration, NO c…
An automated dissolution testing system using UV-Vis analysis The Agilent Multicell UV Dissolution System is one of the most innovative and flexible tablet dissolution systems on the market. The system provides a fully integrated, automated dissolution testing system using the award-winning Cary 50 UV-Vis spectrophotometer, ensuring a highly efficient and rugged solution to online dissolution/UV-Vis analysis.
The Select FAME column is tuned for optimal cis/trans separations of FAMEs, especially the C18 isomers. The bonded column has an isothermal maximum operation temperature of 275°C and a programmed temperature of 290°C - a dramatic improvement of 50°C compared to non-bonded columns. Select FAME has better detection limits because the column has a very low bleed level. Even though this is a very polar column, the column efficienc…
Agilent J&W DB-5ms features an excellent signal-to-noise ratio for analytical applications.
Agilent J&W HP-5ms has very low bleed characteristics that are ideal for GC/MS. The column has excellent inertness for active compounds, including acidic and basic compounds, and improved signal-to-noise ratio for better sensitivity and mass spectral integrity.
Agilent J&W HP-FFAP is designed primarily for the analysis of organic acids, free fatty acids, or samples that require quantitation of acidic impurities. The FFAP stationary phase is modified with acid to provide a very inert column that can accommodate the demanding analysis of acids dissolved in water.
CP-Wax 52 CB GC columns have lower minimum temperature and a higher maximum temperature than non-bonded polyethylene glycol (PEG) columns due to extensive cross linking, delivering higher resolution of low-boiling-point analytes. With guaranteed reproducibility and excellent temperature stability, CP-Wax 52 CB is ideal for EPA and ASTM methods.
Agilent J&W CP-Sil 88 for Dioxins has a very high polarity and a specific selectivity for dioxin and dibenzofuran separations. The column is supplied with an integrated retention gap to avoid problems with solvent condensation, thus allowing repeated splitless injections without phase deterioration, extending column life.
Agilent J&W DB-624 is recommended for EPA methods 502.2 and 8021, as well as for fast GC/MS volatiles analysis. It is specifically designed for the analysis of volatile priority pollutants and residual solvents.
Introduce volatile compounds from virtually any sample matrix into your GC or GC/MS. Automatic Leak Check, Priority Sample Positions, and Barometric Pressure Compensation improve uptime and efficiency.
Dependable leak-free capillary connections allow reliable backflush, split flow, heart-cutting, and GC x GC on Agilent 8890 and 7890 GC systems. These devices are low thermal mass, oven mountable, and inert.
GC/MS methods are widely used for forensic toxicology, especially for the screening of large numbers of target compounds in complex matrices. Full-scan EI methods offer many advantages for broad-range screening, such as an unlimited number of targets, full-spectrum identity confirmation, and library searching for identification of non-targets. Technologies such as Capillary Flow Technology backflushing, Deconvolution Reporting…
Based on the Agilent 990 Micro GC, this Natural Gas Analyzer offers fast analyses with with easy-to-use software and the ability to calculate all required physical properties.
Purge and Trap (P&T) performs highly sensitive volatile organic compound (VOC) analysis with low carryover, allowing accurate and precise GC and GC/MS determination of VOCs in water, wastewater, soils, and sludges.
Based on the 7890 GC and 5977A Series Single Quadrupole Mass Spectrometer, the GC/MS PAH Analyzer is suitable for analyzing poly-cyclic aromatic hydrocarbons in environmental and food samples.
200A pore size; available in 2.0, 4.6, 10and 21.2 mm ids, and lengths from 50 - 250 mm. Pursuit columns are ideal for pharmaceutical applications using LC/MS, from analyzing lead compounds and biological samples in drug discovery, to implementing dependable analysis of raw materials and approved drugs in the QC process. Build on the large 200A pore size silica, high liquid density delivers up to 40% faster separations witho…
600 bar; superficially porous, 2.7 µm particle6; available in 2.1 - 4.6 mm id; 30 - 150 mm lengths. ZORBAX Eclipse Plus columns feature improved silica, special bonding and optimized endcapping that combine to deliver exceptional peak shapes for a wide range of analytes. Agilent's Poroshell 120 columns have a solid 1.7 µm core and a porous .5 µm outer layer, for a total 2.7 µm particle that delivers high resolution and high…
600 bar; superficially porous, 2.7 µm particle6; available in 2.1 - 4.6 mm id; 30 - 150 mm lengths. ZORBAX Eclipse Plus columns feature improved silica, special bonding and optimized endcapping that combine to deliver exceptional peak shapes for a wide range of analytes. Agilent's Poroshell 120 columns have a solid 1.7 µm core and a porous .5 µm outer layer, for a total 2.7 µm particle that delivers high resolution and high…
400 bar; available in 2.1 - 4.6 mm id; 30, 50, 75, 100, 150 mm lengths. Manufactured by Agilent to rigorous QC specifications, the ZORBAX family encompasses 5 particle sizes and more than 32 phases, for reliable scalability and transferability from HPLC to UHPLC, from lab to lab and around the world.
Extend-C18 columns incorporate a unique patented bidentate silane, combined with a double-endcapping process that protects the silica from dissolution at high pH - up to pH 11.5.
Experience the power of analytical compound isolation
