Drug discovery > Basic Research Products & Reviews

This isotonic fluid is specifically formulated for use in flow cytometers.

 The BioFlo 320 seamlessly blends beauty and utility in one all-inclusive package. A new industrial design, flexibility between interchangeable autoclavable and single-use vessels, intelligent sensors, Ethernet connectivity, and a new software package are only a few of the features that set it apart from the competition

Multipurpose UV-Visible Spectrophotometer.   Designed by the leaders in UV-Visible Spectroscopy for molecular absorption quantitative analysis, the UV-1280 Multipurpose UV-Visible Spectrophotometer offers wavelength scanning from 190-1100nm. This lower-cost, high-quality instrument is ideal for applications ranging from routine environmental and food quality testing to life science analyses.   Features: Ea…

ELISA kit for measurement of Fasciola hepatica in cattle and sheep only; Indirect test for blood sera, plasma and milk. Double wells. The test uses 96-well microtitration plates sensitised by a monoclonal antibody specific to one protein of Fasciola hepatica. This antibody is used to trap the protein as well as to purify it from lysate of the parasite.

The E-Cube™ System is a simple bioreactor with 8,500 cm2 cell growth area for growing anchorage dependent cells in only a 25.4 cm x 35.6 cm footprint. Cells grow in Corning’s parallel-plate CellCube® Module on the same treated polystyrene used in Corning culture vessels. The E-Cube™ System kit consists of an oxygenator, medium reservoir, multiple access ports, and all required tubing and fittings; CellCube® Modules must be p…

Approximate growth surface area is 9 cm2 Actual inside growth surface diameter is 34.4mm Height is 10mm Manufactured from optically-clear virgin polystyrene Corning® CellBIND® surface treated for optimal cell attachment Sterilized by gamma radiation and certified nonpyrogenic Have stacking beads to aid in handling Supplied with vents to provide consistent gas exchange

10 µm thick translucent polycarbonate membrane Treated for optimal cell attachment Packaged 12 inserts in a 12 well plate, 4 plates per case Membrane must be stained for cell visibility

(This is the suggested replacement for 3654) Black wall plates have reduced autofluorescence, higher signal to background ratio and lower CV's. Nonbinding (NBS) surface is a Corning proprietary treatment technology used on polystyrene microplates to create a nonionic hydrophilic surface (polyethylene oxide-like) that minimizes molecular interactions Ideal for reducing protein and nucleic acid binding at low concentrations,…

Nonbinding (NBS) surface is a Corning proprietary treatment technology used on polystyrene microplates to create a nonionic hydrophilic surface (polyethylene oxide-like) that minimizes molecular interactions Ideal for reducing protein and nucleic acid binding at low concentrations, and increasing assay signal to noise Without lids, lids supplied separately Recommended working volume of up to 75 to 200 µL Conforms to stan…

(This is the suggested replacement for 3855 and 353381)Excellent signal dynamic range due to low background fluorescence and enhanced signal intensitySuperior flatness minimizes variability within a plate and between platesFlat bottom wells are compatible with automated dispensers including the PerkinElmer FlexDrop™TC-treated for optimal cell attachmentWorking volume of up to 10 µL"

Ultra-Low Attachment microplates feature a covalently bound hydrogel layer that effectively inhibits cellular attachment Surface minimizes protein absorption, enzyme activation and cellular activation Surface is noncytotoxic, biologically inert and nondegradable Sterilized by gamma irradiation Black wall microplates have low background fluorescence, minimal light scatter and reduced crosstalk Opaque walls to prevent wel…

Made of thin wall polypropylene and designed for precise fit in heat blocks to optimize heat transfer Nonsterile and certified DNase- and RNase-free Autoclavable at 121°C and will withstand centrifugation to 10,000 x g

Ultra-Low Attachment surface with covalently bonded hydrogel that minimizes cell attachment, protein absorption, enzyme activation and cellular activation The surface is noncytotoxic, biologically inert and nondegradable Round bottoms with 330 µL total volume Recommended working volumes of 75 to 200 µL Nonreversable lids with condensation rings to reduce contamination Sterilized by gamma radiation and certified nonpyrog…

Flat bottom, with low evaporation lid. Individually wrapped, sterile, 50/case. Unique labyrinth lid, condensation rings, and deep-well design control contamination, reduce evaporation, and minimize edge effects.Reliable vacuum-gas plasma tissue culture treatment provides well-to-well and plate-to-plate consistency. Crystal-grade virgin polystyrene Nonpyrogenic Standard tissue culture (TC)-treated Convenient, peel-open medi…

Unique nitrogen-containing tissue culture surface chemistryImproves attachment, spreading, and growth for many primary cells or cell linesCrystal-grade polystyrene modified by proprietary vacuum gas plasma treatment processStable, permanent surface modificationOptically clearNo special storage requiredSamples from each lot of Corning Primaria products are analyzed by Electron Scanning for Chemical Analysis (ESCA)Packaged in re…

Corning® ITS Universal Culture Supplement, 20 mL, contains insulin, human transferrin, and selenous acid, the three most universally essential components of defined culture media. The concentrated supplement stimulates cell proliferation of a variety of cells under serum-reduced conditions. 20 mL (20L equivalent), 1/packThe ITS Premix (354350 and 354231) contains the following when used at the recommended dilution: Insulin (5u…

Corning® BioCoat™ Matrigel® Invasion Chamber with 8.0 µm PET Membrane in four 6-well Permeable Supports are packaged ready to use in Falcon® Companion Plates, 24/case. Corning BioCoat™ cell culture inserts are pre-coated with extracellular matrix proteins for applications requiring a protein-coated cell surface, such as cell adhesion, growth, invasion, migration and/or differentiation.Storage: -20°C; Shelf life: >= 3 months fr…

2 mL capacity with round bottom Self-standing design Black graduations and larger marking spots for easier filling and sample identification Manufactured from polypropylene to withstand temperatures to -196°C Silicone washer for a secure seal Vials may be color coded with inserts (see Cat. No. 430499) Special base design allows vials to be locked into cryogenic rack and tray (Cat. No. 430525 or 431131) for single-hande…

These 250 mL PYREX® long neck shaker culture flasks are basically Erlenmeyer flasks to which a long straight, rimless neck of heavy tubing has been added. The longer necks reduce the amount of splashed solution reaching the closure. They are ideal for shaker cultures. Their uniform wall thickness provides the proper balance between mechanical strength and thermal shock resistance. For convenience, these flasks include a markin…

These disposable 20x125mm PYREX® culture tubes have a round bottom, GPI 18-415 threads and come without a marking spot. They are designed for both tissue culture and general bacteriological work. These tubes hold approximately 24 mL, are made from borosilicate glass, bulk-packed and are sold without caps. For disposable phenolic caps, see No. 99999.

Axygen® microplate sealing films are designed for applications ranging from PCR and Real-Time PCR to ELISA and cell culture. Axygen’s sealing films are the easiest and most cost-effective method for sealing plates. They can be used in wide temperature ranges, making them suitable for many applications.Allows effective gas exchange for cellular and bacterial cultivation while preventing contaminationSeal polypropylene and polys…

Polystyrene (PS)Packed in resealable bagCurved end or "T" endSterile"

Axygen® microplate sealing films are designed for applications ranging from PCR and Real-Time PCR to ELISA and cell culture. Axygen’s sealing films are the easiest and most cost-effective method for sealing plates. They can be used in wide temperature ranges, making them suitable for many applications.Provides exceptional seal on multiple well plates with a wide range of reagents and temperaturesWhen used in conjunction with A…

The new MaxyGene II Thermal Cycler replaces our successful and reliable MaxyGene. It brings increased speed and advanced features, providing the premium performance you have come to expect from Axygen brand products.Unique flexible programmingRapid run timesImproved workflow over traditional gradient cyclersRamping rates up to 5°C/sec.Simple user interfaceAdjustable heated lid accommodates strips, tubes and microplatesPre-prog…

Axygen® 0.5 mL polypropylene thin wall PCR tubes are designed to fit standard 96 well blocks.RNase-/DNase-freeNonpyrogenicNonsterileManufactured with 99.9% pure virgin polypropyleneCompatible with ABI-310 InstrumentCaps for these tubes are AM-SEPTA-310 Axygen® AxyMats™ Single Septa Cap Compatible with ABI-310 Sequencer, Nonsterile