Products & Reviews

Flat bottom, with low evaporation lid. Individually wrapped, sterile, 50/case. Unique labyrinth lid, condensation rings, and deep-well design control contamination, reduce evaporation, and minimize edge effects.Reliable vacuum-gas plasma tissue culture treatment provides well-to-well and plate-to-plate consistency. Crystal-grade virgin polystyrene Nonpyrogenic Standard tissue culture (TC)-treated Convenient, peel-open medi…

Unique nitrogen-containing tissue culture surface chemistryImproves attachment, spreading, and growth for many primary cells or cell linesCrystal-grade polystyrene modified by proprietary vacuum gas plasma treatment processStable, permanent surface modificationOptically clearNo special storage requiredSamples from each lot of Corning Primaria products are analyzed by Electron Scanning for Chemical Analysis (ESCA)Packaged in re…

Corning® Matrigel® Growth Factor Reduced (GFR) Basement Membrane Matrix, 10 mL, is suited for applications requiring a highly defined basement membrane preparation. Available in standard GFR, High Concentration (HC), and Phenol Red-free formats. Corning Matrigel matrix is a solubilized basement membrane preparation extracted from the Engelbreth-Holm-Swarm (EHS) mouse sarcoma, a tumor rich in extracellular matrix (ECM) proteins…

Corning Matrigel matrix is a solubilized basement membrane preparation extracted from the Engelbreth-Holm-Swarm (EHS) mouse sarcoma, a tumor rich in extracellular matrix (ECM) proteins, including Laminin (a major component), Collagen IV, heparan sulfate proteoglycans, entactin/nidogen, and a number of growth factors.SourceEngelbreth-Holm-Swarm Mouse TumorQuality Mouse colonies routinely screened for pathogens via Mouse Antibo…

Corning® ITS Universal Culture Supplement, 20 mL, contains insulin, human transferrin, and selenous acid, the three most universally essential components of defined culture media. The concentrated supplement stimulates cell proliferation of a variety of cells under serum-reduced conditions. 20 mL (20L equivalent), 1/packThe ITS Premix (354350 and 354231) contains the following when used at the recommended dilution: Insulin (5u…

Corning® BioCoat™ Matrigel® Invasion Chamber with 8.0 µm PET Membrane in four 6-well Permeable Supports are packaged ready to use in Falcon® Companion Plates, 24/case. Corning BioCoat™ cell culture inserts are pre-coated with extracellular matrix proteins for applications requiring a protein-coated cell surface, such as cell adhesion, growth, invasion, migration and/or differentiation.Storage: -20°C; Shelf life: >= 3 months fr…

For tissue culture usage or any non-toxic solution that requires aliquoted or aspirating/dispensing in a sterile environment. Nonpyrogenic pipet with 3 mL overfill capacity. Individually packed in a paper/plastic thermoformed package.

2 mL capacity with round bottom Self-standing design Black graduations and larger marking spots for easier filling and sample identification Manufactured from polypropylene to withstand temperatures to -196°C Silicone washer for a secure seal Vials may be color coded with inserts (see Cat. No. 430499) Special base design allows vials to be locked into cryogenic rack and tray (Cat. No. 430525 or 431131) for single-hande…

Corning is introducing a new 0.1 µm square filter system with a Polyethersulfone (PES) membrane for mycoplasma removal. These new 1000 mL Systems are designed for filtering and storing cell culture media, biological fluids and other aqueous solutions. The new system consists of a 1000 mL polystyrene receiver bottle and filter funnel with a 54.5cm² membrane and a polyethylene neck adaptor with hose connector. Polyethersulfone…

The Corning 5L Erlenmeyer flask is designed to help scale-up suspension culture with space efficiency in mind. The flasks are ready-to-use, ideal for shaker culture applications, and storage. Available with baffled bottom Molded-in graduations for accuracy Highest Sterility Assurance Level (SAL) of 10⁻⁶ Nonpyrogenic and RNase-/DNase-free

Polyethylene terephthalate (PET) bottles are ideal for storage and sampling of media, biologicals, and other aqueous solutions. The PET resin makes the bottle lightweight, break resistant and as transparent as glass.Features: Packaged in two convenient, shrink-wrapped trays within an outer bag to assure cleanliness Break-resistant bottles are an ergonomic and easy to handle alternative to glass Bottles are sterilized to 10⁻…

These heavy duty 150 mL PYREX® round bottles can be used for storage as well as mixing and sampling. They include a linerless, one-piece autoclavable orange polypropylene plug seal GL45 threaded cap with a drip-free pouring ring. New glass bead indicates full capacity line. Bottles have permanent white enamel graduations and marking spots.Caution: DO NOT tighten caps immediately after autoclaving as the vacuum resulting from c…

These 500 mL PYREX® Kuderna Danish Concentrators are supplied with Keck clamps instead of spring hooks. The complete apparatus consists of a 3-Ball Snyder column (with 24/40 Standard Taper joints), a 500 mL flask (with 24/40 Standard Taper top and 19/22 Standard Taper lower joint), and a graduated 10 mL tube with an outer 19/22 Standard Taper joint. The tube graduations go from 0 to 2 mL in 0.1 mL increments and from 3 mL on i…

Translucent polypropylene graduated cylinders are manufactured with raised graduations at the primary scale points. Cylinders have a hexagonal base and are calibrated “to contain” (TC). Tolerances according to ISO 6706. Exposure to temperatures above 60°C may affect accuracy.

These 500 mL PYREX® flat bottom boiling flasks have full length outer 24/40 Standard Taper joints on long necks. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance. Their excellent chemical durability results in contamination-free results and long life under the toughest la…

These 250 mL PYREX® long neck shaker culture flasks are basically Erlenmeyer flasks to which a long straight, rimless neck of heavy tubing has been added. The longer necks reduce the amount of splashed solution reaching the closure. They are ideal for shaker cultures. Their uniform wall thickness provides the proper balance between mechanical strength and thermal shock resistance. For convenience, these flasks include a markin…

Translucent polypropylene flasks are manufactured with blue graduations for reference. The flasks have a screw neck and are supplied with a polypropylene cap.

These 500 mL PYREX® wide mouth Erlenmeyer flasks are especially recommended for use as titration flasks and are designed with heavy duty rims to reduce chipping. For convenience, these flasks are graduated in durable white enamel to show the approximate capacity and have an extra large marking spot. They require a No. 10 rubber stopper for sealing. Their uniform wall thickness provides the proper balance between mechanical str…

The Corning LSE Low Speed Orbital Shaker includes a 30 x 30 cm platform and is ideal for staining and destaining gels, washing blots and general mixing applications. Speed can be set from 3 to 60 rpm and the timer can be set for up to 2 hours or for continuous operation.Ideal for staining and washing of fragile gelsGentle motion prevents foaming of liquidsSimple analog control with easy-turn knobs19mm orbit for blotting, gel s…

The Corning LSE Digital Microplate Shaker features digital control of shaking speed and run time. A single control knob is used to set parameters, and values are shown on a large 3-digit display. A sturdy base encloses the motor for quiet, vibration-free operation. The included stainless steel platform accommodates up to 4 microplates (standard or deep well) and the shaker is safe for use in temperature controlled environments…

The 5 x 5 inch plastic top Corning® Scholar PC-171 Stirrer is compact and provides vigorous stirring with an alternating current motor for longer life and rugged construction. It operates on 120V/60Hz and is UL and CUL approved to meet needs in North America and other locations with similar requirements. -Space saving design and light weight. -UL, CUL and CE approved. -1 x 3/8 inch stir bar (No. 401435) included with each stir…

These hand-driven 15 mL PYREX®; tissue grinders are supplied with two pestles to ensure dissociation of cells into fine particles with minimal damage to cell nuclei. Particularly useful in enzyme studies where heat build-up must be avoided. The internal diameter at the bottom of the unground glass tube (mortar) is .6000 inches Use the large clearance A pestle for initial reduction of soft tissue. The diameter of the ground a…

These PYREX® 14 mL test tubes are made from special tubing to give the optimum wall thickness. They are well annealed, resistant to heat and chemically stable. These 15x125mm tubes have a white marking spot. Beaded rims are fire-polished.

These disposable 20x125mm PYREX® culture tubes have a round bottom, GPI 18-415 threads and come without a marking spot. They are designed for both tissue culture and general bacteriological work. These tubes hold approximately 24 mL, are made from borosilicate glass, bulk-packed and are sold without caps. For disposable phenolic caps, see No. 99999.

Axygen® microplate sealing films are designed for applications ranging from PCR and Real-Time PCR to ELISA and cell culture. Axygen’s sealing films are the easiest and most cost-effective method for sealing plates. They can be used in wide temperature ranges, making them suitable for many applications.Allows effective gas exchange for cellular and bacterial cultivation while preventing contaminationSeal polypropylene and polys…