Products & Reviews

Polar-modified column; available in 3.0, 4.0, 4.6, 10, 21.2 and 50 mm id;  30 - 250 mm length. From the collapse-resistant pore structure of the base silica, to the "wettability" engineered into the bonded phases, Polaris columns have been designed for high aqueous conditions.  The combination of high-phase density bonding, ultra pure silica and silanol shielding leads to excellent peak shape among polar-modified columns.

ZORBAX 80Å StableBond columns are made using bulky, patented, unique silanes that sterically protect the siloxane bond. Acid labile endcapping reagents are not used. The result is vastly improved column life and extraordinary chemical and temperature stability in the pH 1–6 range for a wide variety of phases (SB-Aq, SB-C3, SB-CN, SB-Phenyl, SB-C8, and SB-C18). Excellent peak shape is expected for many basic compounds because…

Bonus-RP columns provide unique selectivity and applicability for mid pHs with an embedded amide linkage in the C14-alkyl chain. At pH 7 Bonus-RP provides excellent peak shape for even the most challenging basic compounds.

The 1260 Infinity II SFC System is a supercritical fluid chromatography (SFC) solution that supports pressures up to 600 bar at flow rates up to 5 mL/min. Its unique FEED injection technology enables reproducible injections over a wide range (0.1 to 90 µL).

The 1290 Infinity II Refractive Index Detector (RID) is a UHPLC RID detector that provides excellent sensitivity, resolution, and sample throughput for UHPLC DRI experiments. The 1290 Infinity II RID is a equipped with an ultralow dispersion microflow cell and a data rate of 148 Hz, which significantly reduces run times for higher sample throughput and improved resolution and sensitivity.

The 1260 Infinity II Degasser is suitable for analytical applications with flow rates up to 10 mL/min and up to four solvents. It is highly recommended for GPC/SEC applications using refractive index detection. It reduces baseline noise and quenching effects due to high degassing capacity.

The 1290 Infinity Flexible Cube is an auxiliary module that allows flexible online SPE applications by supporting up to two Agilent Quick Change Valve drives for online SPE valves and a built-in pump to facilitate enhanced flushing capabilities and to reduce carryover.

The Agilent CE/MS System comprises the Agilent 7100 CE System directly interfaced with any of the Agilent LC/MS systems. A range of ion sources, including standard ESI, can be installed, and additional detectors—such as UV-DAD, LIF, and CCD—can be operated parallel to MS. Agilent MassHunter software can be used to control the entire system from one workstation.

Bond Elut C18 is the most hydrophobic, bonded silica sorbent available in the Bond Elut range. It is the most popular SPE sorbent because of its extreme retentive nature for nonpolar compounds. C18 is generally regarded as having the broadest spectrum of retention among bonded silica sorbents, since it retains most organic analytes from aqueous matrices. 

A variety of empty reservoirs is available to increase the sample capacity of Bond Elut extraction cartridges. These tubes can also be used to pack custom SPE cartridges with bulk Bondesil sorbents or other desired sorbent. They are available from 1 to 60 mL. 

Bond Elut PSA is an alkylated amine sorbent that contains two different amino functionalities, one secondary and one primary. This gives a slightly higher pKa and ionic capacity compared to Bond Elut NH2. PSA has a significantly higher carbon load than most amino functional sorbents and thus is a better choice for polar compounds, which retain too strongly on Bond Elut NH2.

Agilent split liners are made to strict dimension specifications for optimal inlet performance and feature the tightest tolerances for od, id, taper and glass wool placement. 

LC Manual Syringes with PTFE-Tipped Plungers

Prevent unknown peaks from impacting your results   Agilent MS Analyzed Vial Kits end the need to pre-test or to rerun samples due to unexpected peaks. Eliminating vials as a source of contamination translates into confidence that your results are accurate and reliable. All MS Analyzed Vials Kits include a Certificate of Analysis that contains true lot-specific and fully traceable LC/MS and GC/MS signal traces as well as criti…

The ZORBAX Eclipse AAA high efficiency HPLC column rapidly separates amino acids following an updated and improved protocol. Total analysis from injection to injection can be achieved in as little as 14 min (10 min analysis time) on the short, 7.5 cm column and 24 min (16 min analysis time) on the 15 cm column length.Exceptional sensitivity (5 - 50 pmol with DAD, FLD) and reliability are achieved using both OPA and FMOC deriv…

The DNA kits are ideal for automated sizing and quantitation of PCR fragments, restriction digests or fragmented DNA.

The Agilent RNA kits with the patented RNA Integrity Number (RIN) are the industry standard for RNA quality assessment. Do fast, easy and precise integrity checks and sample quantitation before any RNA dependent application.     Maximum flexibility    €“ check the quality of your total RNA, mRNA, or cRNA samples     Minimal sample consumption    €“ use as little as 5 ng of  total RNA or 50 pg of total RNA for analysis, savi…

Spare parts and accessories available for the Agilent 2100 Bioanalyzer.

Agilent ZORBAX 300Å StableBond columns are an ideal choice for the reproducible separations of proteins and peptides for two reasons. Wide-pore, 300Å columns are necessary for an efficient separation of proteins and peptides, or other large molecules, in order to allow these analytes to completely access the bonded phase. 300StableBond columns are unmatched in their durability at low pH, such as with TFA-containing mobile phas…

The 1260 Infinity II High-Temperature GPC System can provide information about all of today’s engineering polymers such as polyolefins, which are one of the most popular polymers with numerous applications. This level of detail helps with development and to predict how a given batch will process and perform in the final product.

By combining the signals from two diode array detectors with different path length Max-Light flow cells, the 1290 Infinity III High Dynamic Range DAD Solution allows you to detect and quantify all components in your sample in a single run.

ZORBAX 80Å StableBond columns are made using bulky, patented, unique silanes that sterically protect the siloxane bond. Acid labile endcapping reagents are not used. The result is vastly improved column life and extraordinary chemical and temperature stability in the pH 1–6 range for a wide variety of phases (SB-Aq, SB-C3, SB-CN, SB-Phenyl, SB-C8, and SB-C18). Excellent peak shape is expected for many basic compounds because…

The Agilent 7100 CE System can be used as a standalone unit, as the separations component of a CE/MS, or as a complementary, orthogonal technology to LC. Extended light path capillaries increase the system’s sensitivity, while the replenishment system enables high-throughput operation.

Whether you need to identify, screen, profile, or perform quantitation on complex samples, Agilent Q-TOF is ready. When simultaneous speed, sensitivity, accuracy, and dynamic range come together, you get the most information from your samples. The immense detail revealed is harnessed by MassHunter software to provide answers you can trust. 

The Agilent 6230B TOF LC/MS system provides accurate mass analyses for a variety of analytical applications including profiling, identification, characterization, and quantification of both small and large molecules. Together with advanced accurate mass software processing tools the 6230B supports applications including drug development, toxicology, and the analysis of recombinant proteins.